DISASSEMBLY / REASSEMBLY INSTRUCTIONS
6.
Using a small screwdriver blade or similar blunt object as a lever, lift the internal antenna assembly from the case.
10503-1
Figure 4.13: Antenna Removal
4.3. Reassembly
Reassembly is the reverse of disassembly.
Ensure that the metal spring inside the Front Cover is not damaged or bent. Replace the complete Cover Assembly if
necessary.
Ensure the securing screws are not over-tightened as this may affect the operation of the keypad.
On completion of reassembly, the handset must be re-calibrated as detailed in Section 7.
Issue B
Section 4
MCUK011201C8
Revision 0
– 24 –
Service Manual