Table of Contents
Advertisement
3.
To remove the speaker (receiver), first remove the retaining clip. Then lift the speaker from the case by inserting a small
screwdriver blade or similar blunt object underneath it.
4.
Lift the DTHF speaker from the case by inserting a small screwdriver blade or similar blunt object underneath it.
5.
The Vibrate motor may be lifted from the case by gently applying pressure under the spindle / counterweight.
MCUK011201C8
Service Manual
Figure 4.10: Speaker (Receiver) Removal
10501-1
Figure 4.11: DTHF Speaker Removal
Figure 4.12: Removal of Vibrate Motor
Section 4
– 23 –
DISASSEMBLY / REASSEMBLY INSTRUCTIONS
10471-1
10502-1
Issue B
Revision 0
Advertisement
Table of Contents
