Toshiba e-STUDIO 850 Series Manual page 49

5
Select the document that you want to print, and press the [SET-
TINGS] button.
If you do not have to change the print settings, you can execute printing by press the
[PRINT] button now.
6
Set the print settings as you require.
If you want to change the number of copies, enter the number using the digital keys.
If you want to specify the drawer where the paper is fed, press the drawer in the illus-
tration in the screen or press the arrow buttons to move the selection.
If you want to perform the 2-Sided printing, press the upper left (shown as the [1
SIDE] button in the above screen) button and change the selection to the [BOOKLET]
or [TABLET] button.
If you want to change the finishing options, such as group printing, stapling, or hole
punching, press the middle left button (shown as the [SORT] button in the above
screen) and change the selection to the desired finishing option.
If you want to change the destination tray, press the lower left button (shown as the
[TRAY 2] button in the above screen) and change the selection to desired destination
tray.
If you want to set the image shift margin, press the [IMAGE SHIFT] button and set the
image shift in the desired position.
If you want to print a time stamp, press the [TIME STAMP] button and select the
desired position.
If you want to print page numbers in each page, press the [PAGE NUMBER] button
and select the desired position.
7
Press the [PRINT] button.
The document is printed.
Getting Started with Control Panel 47