Toshiba e-STUDIO 850 Series Manual page 244

6 Menu Functions (Web utility)
Source
Select the location from where a cover sheet is to be fed. When "Auto" is selected, the paper
is automatically selected according to the printed document size.
When selecting the Bypass Tray in the Source drop down box, the message "Press JOB
STATUS button" will be displayed in the touch panel. When pressing the [JOB STATUS]
button, the message "Place Paper in the Bypass tray Press the START button" will be
displayed. Then place the paper in the Bypass tray and press the [START] button.
The selectable values in the Source drop down box vary depending on the optional
devices installed on this equipment.
Print Style
This selects how you want to print a cover.
- Do not print on page — Select this to insert a blank cover.
- Print on 1 side of page — Select this to print the first page image on the front side of a
cover.
- Print on both sides of page — Select this to print the first two page images on both
sides of a cover. This is available only when the Duplex option is set to either "Book" or
"Tablet"
If "Print on 1 side of page" is selected while the Duplex option is set to either "Book" or "Tab-
let", the first page is printed on the front side of the cover sheet and the back side of the
cover will be blank.
16) Use Back Cover
This sets back cover printing which allows you to insert or print a back cover on a sheet fed
from a different tray than the Paper Source option.
To enable back cover printing, check on the box and select the location from where a back
cover sheet is to be fed and the print style to be used.
Source
Select the location from where a back cover sheet is to be fed. When "Auto" is selected, the
paper is automatically selected according to the printed document size.
When selecting the Bypass Tray in the Source drop down box, the message "Press JOB
STATUS button" will be displayed in the touch panel. When pressing the [JOB STATUS]
button, the message "Place Paper in the Bypass tray Press the START button" will be
displayed. Then place the paper in the Bypass tray and press the [START] button.
The selectable values in the Source drop down box vary depending on the optional
devices installed on this equipment.
Print Style
This selects how you want to print a back cover.
- Do not print on page — Select this to insert a blank cover.
- Print on 1 side of page — Select this to print the last page image on the front side of a
cover.
- Print on both sides of page — Select this to print the last two page images on both
sides of a cover. This is available only when the Duplex option is set to either "Book" or
"Tablet"
242 File Menu Functions