Docomo STYLE Series P-03A Instruction Manual page 572

AT command
ATIn Displays the ID code.
[AT][M]
ATOn Returns from the online command
mode to the online data mode
[M] during communication.
ATQn Sets whether the result code is to
be displayed for the DTE.
[M]
[&F][&W]
ATS0=n Sets the number of rings
required until the FOMA terminal
automatically receives an
incoming call.
[M]
[&F][&W]
ATS2=n Sets the escape character.
[M]
[&F]
ATS3=n Sets the carriage return (CR)
character.
[M]
[&F]
ATS4=n Sets the line feed (LF) character. n=10: Default (n=10 only specifiable)
[M]
[&F]
ATS5=n Sets the back space (BS)
character.
[M]
[&F]
ATS30=n Sets the inactive timer (minute).
When no user data is sent or
received, the connection is cut
after the set time has elapsed.
This command is for only 64K data
communication. When 0 is set, the
[M][&F] inactive timer turns to OFF.
ATS103=n Selects characters to pause for
incoming sub-address.
[M][&F]
ATS104=n Selects characters to pause for
outgoing sub-address.
[M][&F]
ATVn Sets all the result codes in the
[M] numeric or alphabetical notation.
[&F][&W]
ATXn Sets whether to display the
speed in the CONNECT display
at connection.
Detects busy tone and dial tone.
[M]
[&F][&W]
Outline
n=0: Displays "NTT DoCoMo".
n=1: Displays the product name. (same as +GMM)
n=2: Displays the version of the FOMA terminal. (same
as +GMR)
n=3: Displays ACMP information element.
n=4: Displays the details of the function available for
communication on the FOMA terminal.
n=0: Returns from the online command mode to the
online data mode. (can be omitted)
n=0: Displays the result code. (default)
n=1: Does not display the result code.
n=0: Does not automatically receive an incoming call.
(default)
n=1 to 255: Automatically receives an incoming call with
(when n≧10, does not automatically receive a packet
(PPP) incoming call, then the line is disconnected after
about 30 seconds.)
ATS0?: Inquires the set value.
n=43: Default
n=127: Makes escape processing invalid.
ATS2?: Inquires the set value.
n=13: Default (n=13 only specifiable)
ATS3?: Inquires the set value.
ATS4?: Inquires the set value.
n=8: Default (n=8 only specifiable)
ATS5?: Inquires the set value.
n=0 to 255 (default=0) (unit: minute)
n=0: ¢(asterisk)
n=1: / (slash) (default)
n=2: ¥ or back slash
n=0: # (sharp)
n=1: % (percentage) (default)
n=2: & (and)
n=0: Returns the result code in a numeric value.
n=1: Returns the result code in alphabetical characters.
(default)
n=0: Dial tone not detected; busy tone not detected;
speed not displayed.
n=1: Dial tone not detected; busy tone not detected;
speed displayed.
n=2: Dial tone detected; busy tone not detected; speed
displayed.
n=3: Dial tone not detected; busy tone detected; speed
displayed.
n=4: Dial tone detected; busy tone detected; speed
displayed. (default)
39
Parameter/Explanation
the specified number of rings.
Command execution
example
ATI0
NTT DoCoMo
OK
ATI1
FOMA P03A
OK
ATO
CONNECT
ATQ0
OK
ATQ1
("OK" is not returned at this
time.)
ATS0=0
OK
ATS0?
000
OK
ATS2=43
OK
ATS2?
043
OK
ATS3=13
OK
ATS3?
013
OK
ATS4=10
OK
ATS4?
010
OK
ATS5=8
OK
ATS5?
008
OK
ATS30=0
OK
ATS103=0
OK
ATS104=0
OK
ATV1
OK
ATX1
OK
Continued to Next Page