1. Manuals
  2. Brands
  3. Docomo Manuals
  4. Cell Phone
  5. P-05C
  6. Instruction manual

Docomo P-05C Instruction Manual

Prime series
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P-05C
'11.7
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P-05C and is the answer not in the manual?

Questions and answers

Related Manuals for Docomo P-05C

Summary of Contents for Docomo P-05C

  • Page 1 P-05C ’11.7 INSTRUCTION MANUAL...
  • Page 2 Read this manual before use to correctly operate your P-05C. About manual of P-05C Basic Package ⿠P-05C Handset ⿠Battery Pack P20 The operating procedures for the P-05C are also published as in (With Warranty and LUMIX Phone Panel “使いかたガイド (Guide)” on-screen manual installed onto your P50) FOMA terminal, and “Instruction Manual (Detailed Version)” as a PDF. (In Japanese only) ◆“Instruction Manual”...

  • Page 3: Table Of Contents

    FOMA Terminal ································2 Precautions · ·····································6 Contents Introduction What You can Do with P-05C · ··········3 Handling Precautions ···················· 14 P .1 ～ ▶ Part Names and Functions ··············4 Before Using ···················································19 Sound/Screen Setting ····································35 Basic Screen Explanation ········································24 Lock/Security ··················································40 Operation Character Entry ··············································33 P .19 ～ ～ ▶ Call Telephone ················································45 Phonebook ·····················································58...

  • Page 4: Foma Terminal

    ⿠You are advised that you make separate notes of information (such FOMA Terminal as Phonebook entries, schedule events, memos, record messages, ⿠P-05C supports W-CDMA ・ GSM/GPRS ・ Wireless LAN system. voice memos) stored in the FOMA terminal and keep them in a safe place. Note that we cannot be held responsible for the unlikely event ⿠Because the FOMA terminal uses radio waves, you cannot use it in of loss of the stored content due to a malfunction, repair, change of places where the radio waves do not reach, where they are weak your model, or other mishandling of the FOMA terminal. even outdoors, such as inside tunnels, basements, or buildings, ⿠You are advised to save your important data on the microSD card. If or out-of-service area. You might not be able to operate the FOMA you have a personal computer, you can transfer and save data such terminal even when you are in a place with a fi ne view such as in as Phonebook entries, mail messages, schedule events, and others a high-rise building or apartment. Note that you may experience on the personal computer by using DOCOMO keitai datalink. interruption of calls even if the three antennas respond to a strong ⿠The instructions given in this manual are for operating the FOMA radio wave, and you remain without moving to use the FOMA terminal when the DOCOMO’s UIM is used. terminal. ⿠Since the FOMA terminal uses radio waves as the medium of Unlocking SIM telecommunication, calls may be tapped by a third party. However, the W-CDMA ・ GSM/GPRS system automatically supports This FOMA terminal supports SIM unlock. When the SIM is unlocked, other operator company’s SIM cards can be used with your FOMA tapping prevention, so your conversation will be incomprehensible to terminal.

  • Page 5: What You Can Do With

    What You can Do with P-05C 使いかたガイド (Guide) ▶ P.32 ▶ ▶ i-concier P.81 Koe-no-Takuhaibin P.46 You can check “使いかたガイド (Guide)” i-concier works to serve you with a This service enables to keep voice on screen for how to operate a function...

  • Page 6: Part Names And Functions

    Part Names and Functions ❾ ❶ Light sensor �ii-mode key/i-αppli key ❶ For sensing brightness (Do not cover it �hPower/End key with your hands or do not put a sticker on ❷ For turning on/off the power or ending a it. Doing so might disable detecting the call brightness.) � Numeric keys ❷ Earpiece For entering phone numbers and text For listening to the other party’s voice � Connector terminal ❸ ❸ Display/ Touch panel Integrated terminal for connecting earphone ❹mMenu key or for charging, etc. �...
  • Page 7    Flash <Side ▲ key fmark For turning up the earpiece volume during An IC card is installed. Use it for a call Osaifu-Keitai or iC communications. >Side ▼ key Camera For turning down the earpiece volume For shooting portraits and/or landscapes during a call LUMIX Phone panel vShutter key Remove this when attaching/removing the battery pack, UIM, and microSD card. For shooting a subject by the camera Do not peel off the sticker on the rear xMulti key surface of the LUMIX Phone panel. If you For showing the Task menu peel it off, IC card may not be written and read. Speaker GPS antenna ※ Strap hole FOMA antenna ※...

  • Page 8: Precautions

    Precautions ALWAYS FOLLOW THESE DIRECTIONS ■ Before using the FOMA terminal, read these safety precautions carefully so that you can use it correctly. After reading the precautions, keep them in a safe place. Denotes not to touch with wet hands. ■ Be sure to observe these safety precautions to prevent you or Not wet those around you from infl...
  • Page 9 (When IC Otherwise, injury may result. by NTT DOCOMO, INC. Card Lock is set, release the lock, Fire, burns, injury or electric shock and then turn off the power.)
  • Page 10 Keep out of the reach of babies While using infrared Turn off the FOMA terminal in communication, do not point the and infants. places where use is prohibited FOMA terminal’s infrared data such as in airplanes and hospitals. Accidental swallowing or injury may port at a home electrical appliance result.
  • Page 11 For those with weak heart If the display part or camera lens The surface of the display is coated conditions, the vibrator and ring is broken, be careful about broken by a film that prevents the surface volume must be adjusted carefully. glasses or the exposed interior of from damage to ensure your safety the FOMA terminal.
  • Page 12 The battery may catch fire or If the battery fluid or other material damage the environment. After Don’t gets into your eyes, do not rub insulating the battery terminals them. Flush your eyes with clean with tape, take the unneeded water and seek medical attention battery to a handling counter such immediately. as a docomo Shop or dispose of it in accordance with local waste Otherwise, the loss of eyesight may disposal regulations. result.
  • Page 13 Do not use or attempt to charge a The DC adapter is for use only in a Use the adapter at the specified V wet battery. negative (-) grounded vehicle. Do not use it in a positive (+) grounded When charging the FOMA terminal Otherwise, the battery pack may vehicle.
  • Page 14 Notes on using near electronic When unplugging the power plug Turn off the FOMA terminal in medical equipment from the power outlet or cigarette trains during the rush hour or lighter socket, do not yank the other crowded areas as there may ■...
  • Page 15 ■ List of materials used Where it is used Material/Finishing Battery stopper Where it is used Material/Finishing (Inside LUMIX Phone panel), Outer casing Display surface PC/UV coating Lock claw for LUMIX Phone panel Battery surface Battery Resin part Numeric key side ABS/UV coating terminal Terminal area Beryllium copper/ surface, Display side nickel plating + gold plating surface, Speed selector Battery pack Resin area surface Label Cap (Slide surface), Sheet area (Slide Terminal area Glass epoxy substrate/ surface) nickel plating + gold plating Metal part (Slide surface) Magnesium UIM slot surface Connector terminal Stainless steel/ Screw (Inside LUMIX Phone panel), Steel/nickel plating...

  • Page 16: Handling Precautions

    Handling Precautions Where it is used Material/Finishing LUMIX Body ABS/aluminum foil + UV coating Phone panel General notes Camera ring area (Inside) Aluminum/alumite treatment ■Do not wet the equipment. Camera ring area (Middle) Acrylic urethane The FOMA terminal, battery, adapter, and UIM are not ※1 Camera ring area (Outside) PC/UV coating waterproofed. Do not use them in environments, which are high ※2 Camera ring area (Outside) PC/tin vapor deposition + UV in humidity such as in bathrooms, and do not allow them to get coating wet from rain. Furthermore, if carrying them against your body, they become moist due to perspiration and the internal parts may Connector terminal side ABS/UV coating become corroded, causing malfunction. If the parts are found to Projection part of PC/aluminum vapor deposition have been damaged due to exposure to the liquids, any repairs connector terminal side + UV coating will not be covered by warranty, or repairs may not be possible. Sheet of battery This may be repaired at a cost if repairs are possible.
  • Page 17 ■Do not rub or scratch the display part with metals. ■When using the FOMA terminal, ensure that you shut the cover Doing so might cause damage to the part, resulting in trouble or for the connector terminal. malfunction. Dust or water might enter into the FOMA terminal, causing ■Carefully read each instruction manual attached to battery malfunction. ■Do not use the FOMA terminal with the LUMIX Phone panel left pack, adapter, or desktop holder.
  • Page 18 ⿠Storage with no battery power left (the state you cannot turn We take no responsibility for any loss of the stored data items. ■For the environmental protection, bring any unneeded UIMs to on the power of the handset due to battery drain) These may lower the battery pack’s performance and shorten its a handling counter such as a docomo Shop. ■Do not damage, carelessly touch, or short-circuit the IC. operating life. Before storing a battery, check its remaining battery level: it is Data might be lost or malfunction may result. ■Do not drop the UIM or subject it to strong impacts.
  • Page 19 2. If radio interference between this product and “another radio station” occurs, move immediately to another place or turn off power to avoid interference. 2.4 : Indicates radio facilities that use 2400 MHz 3. For further details, contact “docomo Information Center” on frequencies. the back page of this manual. DS/OF : Indicates modulation is the DS-SS/OFDM system.
  • Page 20 Japan. objects or amateur radio stations, or if any trouble occurs, You might be imposed punishment if you use them overseas. ■Use the Wireless LAN (WLAN) functions in Japan only. contact “docomo Information Center” on the back page of this manual. The Wireless LAN functions on the FOMA terminal have been authorized in compliance with the radio transmission standards in Notes on handling the FeliCa reader/writer Japan.

  • Page 21: Before Using

    Before Using Attach the battery pack. Attaching UIM/ Battery Pack With the arrow mark facing up, fi t the tab side of the battery pack to the FOMA terminal securely, Remove the LUMIX and then push the battery pack Arrow mark Phone panel. in direction B while pressing it against direction A. Close the FOMA terminal, and use Battery both hands to slide the LUMIX When you remove the battery stopper Phone panel part as illustrated, in pack the direction of the arrow (by 2 mm While pushing the battery stopper or more) to unlock and remove. in direction A, lift the battery pack in direction B using the projection of it. Insert the UIM.
  • Page 22 With the engraved surface of the when you install or remove the LUMIX Phone panel, UIM, or connector of the AC Adapter (option) face battery pack. ⿠You cannot use the UIM (blue) on your FOMA terminal. If up, plug the connector straight into the you have that blue one, have it replaced at a docomo Shop. connector terminal until it clicks. ⿠To charge the battery, place the cover of the connector terminal as illustrated. Pull out the cover of the connector terminal to the direction A, and turn it to the direction B. Pull out the AC Adapter’s plug, and plug...

  • Page 23: Connect

    Charging Using Desktop Holder When charging is completed, AC Adapter’s hold the desktop holder with plug Power Call/Charging indicator socket fingers, press down the FOMA Back case terminal while holding the Engraved surface AC Adapter Connector upper side of it (C), and tilt it forward to terminal remove (D).

  • Page 24: Turning Power On

    Turning Power ON Configuring Initial Setting The Initial Setting display appears when you turn on the Press and hold h for at power for the first time. least one second. Set the date and time. After the Wake-up display is You can set the date and time. You can also correct the date displayed, the Stand-by display and time automatically. appears. Set your Terminal Security Code.

  • Page 25: Checking Your Own Phone Number

    Notifying Your Caller ID on the Other Switching to English Display Party’s Phone 本体設定 (Setting) ▶ 文字表示／入力 (Text display/input) ▶ ▶ TEL function Dial/Receive setting ▶ ▶ Caller ID notifi cation ▶ Select language Select “Activate/Deactivate”. Select “English”. Select “ON”. ⿠The “バイリンガル (Select language)” setting is saved on the UIM.

  • Page 26: Screen Explanation

    Screen Explanation Viewing Display/Icon S tatus icon Battery level (estimate) ··········· A Bluetooth device is connected. ··········· A microSD card is inserted. ·········· Vibrator is set. Full Low ⿠When is shown, charge the battery. ·········· Ring Volume is set to “Silent”. ⿠Depending on the usage state, the battery ·········· In Manner Mode level indication might signifi...
  • Page 27 Using Motion Control Notifi cation icon ······ New i-mode mail or SMS Motion Control enables to switch the display direction automatically by tilting the FOMA terminal. ······ Missed call ⿠The major functions that support Motion Control are listed ······ Record message below: ······ Videophone record message ・ P icture Album ※1※2 ・...
  • Page 28 Operating Speed Selector Navigation Displays and Key Operations Key operations you can perform while you are operating a ⿠Moves the cursor or ⿠Moves the cursor to the function are shown at the bottom of the display. (Navigation highlighted display up. (Hold right. displays) ⿠Scrolls forward page by down to scroll continuously.) ■Key assignments and basic navigation displays ⿠Scrolls the page up.

  • Page 29: Menu Operation

    Operating by Turning Speed Selector Menu Operation In some displays, you can turn the speed selector to select Main Menu o , and can move the items the same way as you press Press m from the Stand-by display to show Main Menu. cursor.

  • Page 30: Simple Menu

    Simple Menu Functions Starting with Simple Operation Simple Menu is a menu focusing on only basic functions for Depending on the function, you can start it either by selecting easy operation. By setting “シンプルメニュー （Simple menu） ” a menu item or by key operation from the Stand-by display. using the Kisekae tool, you can show the Simple Menu by The following are the functions you can start by pressing keys pressing m from the Stand-by display.

  • Page 31: Using Touch Panel

    Basic Touch Panel Operations Using Touch Panel The touch panel can be used to perform actions such as Operation Main Operation selecting items and scrolling display. “ ” is displayed when Touch Select/OK ⿠Touch an item or control key on the the touch panel can be used, and “ ”...

  • Page 32: Screen Lock

    ■Magnification/Reduction Operation Main Operation You can zoom in or out the Pull apart/Pinch together Magnification/Reduction ⿠The image or display will zoom in or pictures displayed in the Picture Slide two fingers apart or pinch together. out. Album and sites displayed in the Full Browser. ⿠Position and type of control keys and slide levers depend ■Control key on the functions. For Speed selector operations, Screen Lock dial key operations, or Submenu operations, you can perform When the Power Saver Mode activates during the FOMA the equivalent operations by terminal is closed and a function that supports the touch touching the control keys (long panel is in use, Screen Lock activates and the touch panel touch).
  • Page 33 Normal Menu Displaying Touch Menu You can display the Touch Menu by touching the touch panel When “ ” is touched, the Normal Menu from the Stand-by display. is displayed. Home Menu You can operate any of the functions by touching the corresponding icon on this When “...
  • Page 34 Using Start by Voice Using Guide You can call up the function by voice. You can search and check the operating methods of the This function is available in Japanese mode only. functions you want to know and use. You can execute some ⿠The fi...

  • Page 35: Character Entry

    Character Entry You can enter characters on the Registration display for Phonebook entries or the Composition display for mail messages, etc. Select a input mode. Convert/fi x characters. Press l( ) to select one of the o to specify the area to be 1. Press N input modes. converted. o to move the cursor onto 2. Press B the candidate list. Enter characters. o to select a conversion 3. Press M candidate.
  • Page 36 <Example> Entering “タダの菓子” in the text of an i-mode mail message ▶ o to move the cursor ▶ Select the text fi eld. to the right of “の”. o to move the cursor Enter hiragana characters in onto the candidate list Kanji/Hiragana input mode.

  • Page 37: Sound/Screen Setting

    Adjusting Ring Volume Sound/Screen Setting <Example> Adjusting the ring volume for incoming voice calls Changing Ring Tone ▶ ▶ Setting Sound/Vib./Manner <Example> Changing the ring tone for incoming voice calls ▶ Ring volume ▶ ▶ Setting Sound/Vib./Manner ▶ Select ring tone Select “Phone”.

  • Page 38: Keypad Sound

    Using Manner Mode Setting Keypad Sound OFF With a single key press, you can set a tone from the FOMA You can silence a Keypad sound for when you press a key. terminal such as a ring tone, keypad sound, and alarm sound ▶...
  • Page 39 Changing Display Brightness Making Display Hard to See from People Around You can adjust the brightness of the display. You can also set to automatically adjust the display brightness according to You can set “View blind” to make it harder for the people the ambient light.

  • Page 40: Changing Font Size

    Changing Font Size Using Kisekae Tool <Example> Changing the size of all the characters to “X-large” You can set the ring tone, Stand-by display, menu icons and others at a time. Press and hold 7 for at least one ▶ ▶...
  • Page 41 Changing Illumination When Receiving Switching to the eco Mode <Example> Changing call Illumination for voice calls With a single key press, you can set the eco Mode that reduces battery consumption. Changing to eco Mode affects ▶ ▶ Setting Backlight/Illum. items specifi...

  • Page 42: Lock/Security

    ⿠The PIN unblocking key (PUK) is described on the When the mobile phone automatically application form (your copy) that is handed over to you at switches to eco Mode, “ ” will be a docomo Shop at the time of contract. If your contract displayed and “ ” will be displayed on the desktop. has been made at a shop other than a docomo Shop, you need to bring an identifi...
  • Page 43 This is a four-digit number required for your identifi cation When the PIN1 Code/PIN2 Code entry display appears, enter when you place an order at a docomo Shop, docomo your four-to-eight digit PIN1 code/PIN2 code and press Information Center, or “お客様サポート (User support)” site, or when you use respective network services.

  • Page 44: Various Lock Functions

    ⿠If you enter a wrong PIN unblocking key (PUK) 10 times in Dial Lock You can set your FOMA terminal not to be succession, the UIM is locked. In that case contact one of used by a third party. docomo Shops. You can do no operations other than answering calls and turning on/off the power. PIN1 Code Entry Set 1. m ▶...

  • Page 45: Keypad Lock

    (such as Phonebook entries) and the IC terminal or the specified time elapses without any operations. card function of Osaifu-Keitai by contacting ▶ ▶ Setting Lock/Security DOCOMO. ⿠For details on Omakase Lock, refer to “User’s ▶ Keypad lock Guide [Basic Usage]”. ■Setting/Releasing Omakase Lock Enter your Terminal Security Code 0120-524-360 (In Japanese only) ▶...
  • Page 46 Setting Incoming Call Restriction Resetting to Default Resetting the Function Settings to Default You can set whether to receive (accept) or not to receive (reject) incoming calls depending on the reason, such as from You can reset the items on “Function List”, which are the parties which has not been registered in Phonebook or indicated by .

  • Page 47: Call Telephone

    Making a Call from Phonebook Call Telephone <Example> Search a Phonebook entry by the name stored in Making a Call/Videophone Call Phonebook Making a Call by Entering the Phone Press Number Select “Search name”. Enter a phone number starting with a city Enter the reading of the name from the fi...
  • Page 48 Making a Call with Redial/Received Calls Making an International Call You can use WORLD CALL to make an international call from o (Redial) or o (Received calls). Press Japan. ⿠Contact “docomo Information Center” on the back page of this manual for inquiries about details on WORLD CALL. Select a call record ▶ ⿠When using international carriers other than DOCOMO, ⿠Press c( ) to make a videophone call. contact them.

  • Page 49: Adjusting Earpiece Volume

    Receiving a Call/Videophone Call When You cannot Answer a Call Activate Record Message A call comes in. By activating Record Message, you can record a caller’s The ring tone sounds and the Call/Charging indicator lights. voice/video message when you cannot answer the call. ⿠When a call comes in, an answer message is played back Press d to answer the call. after the ring time elapses. Then, the caller’s voice is recorded with audio or video.
  • Page 50 Using Public Mode (Drive Mode) Using Public Mode (Power Off) Once you activate Public mode (Drive mode), the guidance is Once you activate Public mode (Power off), when the FOMA played back telling that you cannot answer the call as you are terminal’s power is OFF, the guidance is played back telling currently driving or in a public place (such as a train, bus or that you cannot answer the call as you are currently in a...
  • Page 51 ⿠The outlines of the each network service in this manual are described along with the menus of the FOMA terminal. For details, refer to “Mobile Phone User’s Guide [Network Services]”. ⿠For subscriptions and inquiries, contact “docomo Information Center” on the back page of this manual.

  • Page 52: Using Voice Mail Service

    Using Voice Mail Service Using Call Waiting Service ▶ TEL function ▶ Voice mail service ▶ TEL function ▶ Other network serv. ▶ Call waiting To activate the service 1. Select “Activate” ▶ Select “YES”. To activate the service ⿠You can also specify a ring time. 1. Select “Activate” ▶ Select “YES”. To play back the message Answer an Incoming Call during a Call 1. Select “Play messages”...

  • Page 53: Emergency Call

    Emergency Call Emergency Calls Phone number Calls to police Calls to fire station and ambulance Calls for accidents at sea ⿠This FOMA terminal supports “Emergency Location Report”. When you make an emergency call such as at 110/119/118, information about the place where you are dialing from (location information) is automatically notified to emergency-response agencies such as police stations. It might happen that your correct location is not detected by emergency-response agencies depending on the location you dial from or radio wave conditions. When your location information is notified, the name of emergency-response agency is displayed on the Stand-by display. When you do not notify your phone number such as by adding “184” by every call, your location information and phone number are not notified. However, when an emergency-response agency has judged that the location information and phone number should be detected because of emergency priority such as for protection of human life, it might get location information and phone number regardless of your setting. Areas and timing “Emergency Location Report” introduced vary depending on the preparation of respective emergency-response agencies. ⿠When you make a call at 110/119/118 from the FOMA terminal, tell an operator that you are calling from a mobile phone and let them know your phone number, and then clearly tell where you are currently around, so that police/fire station can make a confirmation call to your mobile phone. In addition, stay at the current location while talking preventing the call from being disconnected. Do not turn off the power immediately, and make sure to place your phone standby for at least 10 minutes after the call. ⿠You might not be connected to regional police/fire station depending on the area where you are calling from. ⿠When using the videophone function of the FOMA terminal to place an emergency call to 110, 119 or 118, the call will automatically be made as a voice call.

  • Page 54: Using Overseas

    Japan, in a service ※1 ○ ー ー Videophone call ※2 ○ ○ ○ area of the overseas carrier partnered with DOCOMO. It ※3 ○ ○ ー i-mode enables you to continue using the voice call, SMS and ○ ○ ー...

  • Page 55: Mail

    Making a Call to Outside the Country You Stay in Mail Sending i-mode Mail 0(for at least one second) ▶ Enter numbers in order of country code Once you subscribe to i-mode, you can exchange e-mail →area code (city code) messages over the Internet.
  • Page 56 Sending Deco-mail Sending Decome-Anime You can change the color or size of characters or background You can create impressive messages by inserting text or color, or insert images or Deco-mail pictograms. images into a Flash fi le. ▶ ▶ Create new Deco-Anime ⿠You can also select “Decome-Template” to create Enter an address and subject.
  • Page 57 Replying to i-mode Mail Displaying Received i-mode Mail Press c( ) while an i-mode mail is ▶ Inbox displayed. Select a folder. Enter each item. Select an i-mode mail message. Press c( Forwarding i-mode Mail 1. m( ) while an i-mode mail is displayed ▶ ▶ Reply/Forward Forward 2. Enter each item.
  • Page 58 Checking New i-mode Mail Sorting i-mode Mail You can check the i-mode Center for a new mail message or You can use “Auto-sort” to sort received/sent i-mode mail Message R/F. messages into a folder such as “Business” or “Friend” which has been created in advance.

  • Page 59: Using Sms

    Early Warning “ Area Mail” Using SMS Receiving Area Mail You can send text messages to the mobile phone number at the other party. You can receive information such as about earthquake alerts Sending SMS that are issued from the Japan Meteorological Agency as an Area Mail message.

  • Page 60: Phonebook

    Displaying Received SMS Message Phonebook Storing Phonebook Entries ▶ Inbox Storing New Phone Numbers/Mail Select a folder. Addresses, etc. You can store Phonebook entries in the FOMA terminal Select an SMS message. (Phone) or on the UIM. o for at least one Press and hold second.

  • Page 61: Search

    Storing Phonebook Entries from Redial/ Editing Phonebook Entries Received Call ▶ Search and select a Phonebook o (Redial) or o (Received calls). Press entry. ▶ Edit phonebook Highlight a call record and press ▶ Select an item to be edited ▶...

  • Page 62: I-Mode/Full Browser

    ■Before using i-mode i - mode/Full Browser ⿠Content of sites or websites is in general protected by Displaying i-mode Sites copyrights law. You can use data such as text and images for your entertainment, which you download to your mobile i-mode is a service that enables you, by using the display of phone supporting i-mode, but you cannot use them, part or the mobile phone supporting i-mode, to use online services whole of it as is, or modify them for the purpose of sale or such as site access, Internet access, and i-mode mail. redistribution, without approval from copyright holders.
  • Page 63 Displaying Websites Designed for PC Switching Browsers You can browse Internet websites designed for PCs using the You can switch to Full Browser to show the Internet websites Full Browser function. incorrectly displayed by i-mode. ⿠Note that you are charged a high communication fee for ⿠The billing system differs between i-mode and Full Browser. the massive data communication such as browsing Internet With the latter, as packet communications fee will be a large websites having many images or downloading data. For sum, you are advised to use i-mode packet fl...

  • Page 64: Saving Site Contents

    Viewing and Operating Sites Saving Site Contents Operations on site viewing display If you save the page once you visited as a screen memo, you Scroll display/Move highlighted/ can easily refer to it without connecting to i-mode. Move the pointer: M ) while the site is displayed Select an item (link): O ▶...

  • Page 65: I-Channel

    Stand-by display by tickers. You can read it on the i-Channel list by pressing Further, two types of channels, “Basic channel” provided by DOCOMO and “Okonomi (Optional) channel” provided by IPs (Information Providers) are available. You are not charged a packet communication fee for auto-updates of “Basic channel”...

  • Page 66: Map/Gps

    ⿠When providing position information or notify your current location, check the information given from your GPS service provider or DOCOMO’s website. In some cases, you may be charged for using these functions. ⿠When you are outside the service area, you cannot use the GPS function except to check your current position.

  • Page 67: Position Location

    Reading Map Checking Current Location You can start GPS compatible i-αppli, and you can read a You can locate your current location by GPS. You can also map of current or specified location. display a map using this location information and send this ⿠At purchase, “地図アプリ (Map Application)” is set.
  • Page 68 Enter a stride (cm). positioned once every five minutes according to your movements.) ⿠When you start to use the AUTO-GPS function, check GPS Using Service provided by DOCOMO service providers or the DOCOMO website for how you can Select whether you use the AUTO-GPS service that syncs use services. It might happen that you will be charged a fee with i-concier or respective services provided by DOCOMO. for using them. ⿠Set the service to “ON” to automatically and periodically ⿠You might separately be charged a packet communication send your location information from the FOMA terminal to fee for sending your location information. DOCOMO. ⿠Note that depending on the way you use your FOMA terminal, ⿠To use i-concier or respective services, you need to the level of the power consumed by the FOMA terminal may separately subscribe for and establish the settings.

  • Page 69: Camera

    Camera Viewing and Touching Operation of Finder Display You can use the camera to shoot still images or moving pictures. You can use the touch panel to operate the camera when shooting. You can check the settings. By touching, you can switch to Touch Zoom. Touch a point to be By touching, you can make the zoomed in. display brighter than usual. You can adjust the magnifi cation by By touching, you can display the touching W (Wide) or T (Tele).

  • Page 70: Shooting Still Images

    Shooting Still Images/Moving Pictures Viewing Still Images/Moving Pictures after Shooting Shooting Still Images You can display the still image or the moving picture you have Press v. shot in Picture Album. You can detect a person’s face on the still image you have shot and expand it, or add corrective effects to the detected face.
  • Page 71 ・ Photo panel ・ PC backup ・ Transfer pic. ・ Display pic. Select a burst ・ Favorite ・ Delete ・ SEL always ⿠When you use Wi-Fi function, you need to connect P-05C shooting speed. with access point device and set in advance. ▶ Touch a fi le long on the fi le list. ⿠The best-shot still image is enlarged. Function icons appear on the left, right, top and bottom of ⿠“...
  • Page 72 This <Example> Using “Group shutter” to shoot a group of three lessen deterioration of the image quality caused by hand persons vibration more than before. ⿠P-05C adopts Optical image stabilizer with movable lens ▶ ▶ MENU AutoShutter system. Therefore, the center of the camera lens area might not stay in the center of the outer frame. It has no impact on...

  • Page 73: 1Seg

    1Seg Using 1Seg ■Using 1Seg 1Seg is a service provided by television entrepreneurs (broadcasting stations). You are not charged a communication fee for receiving video and audio. For about fee charged by NHK, contact NHK. ※You are charged a packet communication fee for browsing “Data broadcasting site” and “i-mode site”. You might be charged an information fee for using some sites (i-mode pay sites).

  • Page 74: Setting Channels

    Setting Channels Watching 1Seg When you activate 1Seg for the first time or change the area Press and hold c for at you are in, you need to operate “Channel setting”. Select least one second. “Auto channel setting” to enable you to search automatically for broadcast stations you can watch.
  • Page 75 Viewing and Operating Viewer Display Displayed while you are watching a 1Seg program Video being recorded Program’s name Video Switch Visual Image/Caption Caption Airwave Reception Level (estimate) 　 　 Data Broadcasting Strong Weak “ ” appears out of the broadcasting area. Operation Mode Sound Volume : Video Mode Displayed while receiving caption : Data Broadcasting Mode information...
  • Page 76 Setting Timer Watching or Recording Playing Recorded Video 1Seg ▶ Data box ▶ 1Seg Set the date and time, a channel, and program name, and enter them to the TV Timer List or Timer Recording List. When ▶ Select “Video” Select a fi...

  • Page 77: Music

    Setting Programs Music Music&Video Channel ▶ CAMERA/TV/MUSIC ▶ Music&Video Channel ▶ Program set. Music&Video Channel is a service which automatically delivers up to about two-hour sound programs at night just by selecting Follow the instructions on the display to your favorite music programs etc. in advance. Further, you can enjoy high-quality video program of up to about one-hour.

  • Page 78: Music Player

    ® Downloading Chaku-uta Full Music Playing Music Files Files ® MUSIC Player enables you to play Chaku-uta Full music fi les ® you have downloaded from sites, or to play Windows Media ® You can download Chaku-uta Full music fi les from sites. Audio (WMA) fi...

  • Page 79: I-Αppli/I-Widget

    i - αppli/ i - Widget Starting i-αppli Press and hold i for at least one i-αppli is a software program for mobile phone supporting i-mode. By downloading various software programs from second. the i-mode site, you can use your FOMA terminal more conveniently.
  • Page 80 Downloading i-αppli from Sites ⿠You can delete the pre-installed i-αppli programs. You can re-download deleted programs from the “P-SQUARE” site. You can download not only i-αppli programs but also the Select a software program from a pre-installed Deco-mail pictograms, Kisekae Tool files, downloadable site. Machi-chara images, Chara-den images, templates, dictionaries, and Content packages from the “P-SQUARE” Select “OK” when downloading ends. site (in Japanese only). ⿠When the software program is storable in “Customize iMenu→メニューリスト (Menu List)→ケータイ電話メー カー (Mobile Phone Maker)→P-SQUARE Menu”, the confirmation display appears asking whether ⿠Deadlines for re-download services to store it. ・ “リバーシ (REVERSI)”: the end of March, 2015 Select “YES”. ・ “ハイパー四川省 (Hyper Sichuan)”: the end of March, 2015 ・ “モバイルGoogleマップ (Google Map for Mobile)”: the end of May, 2014 ⿠The re-download services may be halted or closed without notice even in the service period.

  • Page 81: I-Motion/Movie

    Downloading i-motion/Movie i - motion/ Movie i-motion is a fi le consisting from video, audio, and music Select an i-motion/movie fi le from a which you can download to your FOMA terminal from downloadable site. i-motion sites that support i-motion. You can also set it for a ring tone.

  • Page 82: Osaifu-Keitai

    Osaifu - Keitai Osaifu-Keitai/ ToruCa Osaifu-Keitai is equipped with the IC card which enables you to make payments, use coupons, enjoy stamp rallies and so on by placing the FOMA terminal over the scanning device in the stores or other locations. Furthermore, by placing the FOMA terminal over a scanning device, you can access sites and web pages, obtain the latest coupons by communication, and check the deposits of electronic money and the status of its use.

  • Page 83: I-Concier

    Phonebook. It also allows you to share the schedules or images held by the DOCOMO’s Data Displaying i-concier Storage Center with friends, family members or other groups. It also enables you to easily print out the images held.

  • Page 84: Convenient Tools

    Using Alarm Convenient Tools Using Schedule ▶ Tool ▶ Alarm ▶ ▶ Tool Schedule Highlight an alarm and press c( Select a date to show a schedule event of the selected date. Select the schedule Enter each item. event to confi rm its details. Press c( ▶ Select “New”. ⿠The alarm does not sound in Public mode (Drive mode), Enter each item. Dial Lock, “Alarm” locked in Original Lock or Omakase Lock. Press c(...

  • Page 85: Others

    The subject is focused on by autofocus function. Press ) to scan the code. ■ QR code A URL is displayed as a scanned result. QR code is one of the two-dimensional codes ▶ Select the URL Select “i-mode Browser”. that denotes data in the vertical and horizontal directions. ⿠“株式会社NTTドコモ (NTT DOCOMO, INC.)” is displayed when you scan the QR code with the FOMA terminal.

  • Page 86: Connecting With Bluetooth Devices

    Connecting with Bluetooth Devices Bluetooth Function You can connect your FOMA terminal to a Bluetooth device ▶ Tool ▶ Bluetooth ▶ Device list such as Wireless Earphone Set 02 (option), and can talk on the phone or play music files. Select a Bluetooth device Registering a Bluetooth Device to FOMA Terminal...
  • Page 87 ⿠When you use Access point mode for the first time, you portable game machine, personal computer, etc. in Access are required to agree to the notes. point mode. ⿠When you use Access point mode, you need to connect to the provider, such as mopera U. Access point area ⿠Connection is set to “mopera U 128k” at purchase. Portable game Wi-Fi connection machine Portable game machine Provider P-05C (sub unit) (base unit) FOMA network Internet (Provider such as mopera U)
  • Page 88 Wi-Fi ▶ Client mode Wi-Fi connection Store profi le ▶ Access point search Select an Access point ▶ P-05C Access point device ▶ Select “YES” ▶ Select “YES”. External devices (sub unit) (base unit) such as To activate or deactivate Client mode...
  • Page 89 Displaying Still Images DIGA/DLNA Link You can display a still image on microSD card in P-05C by You can use Client mode to display a still image shot with external device. P-05C using external device or to play back a TV program ⿠You can also operate this function using “Display pic.” on...

  • Page 90: Using Pedometer

    Using Pedometer Creating Handwriting Photo/Memo As you walk with your FOMA terminal in hand or in your On the touch panel, you can draw pictures or write characters pocket, your pace is measured, and then depending on the by hand onto the images or you can add decoration. The measured results, your distance, calories consumed, and Handwriting photos/memos you have created are saved as body fat burned are displayed.

  • Page 91: Data Management

    If you do not have a microSD card, you need to purchase it. facing downward, ⿠P-05C supports a commercial microSD card of up to 2 Gbytes and microSDHC card of up to 32 Gbytes (As of make sure that the May 2011).
  • Page 92 Formatting microSD Card Icons on the Display When you use the microSD card for the fi rst time, you need to format (initialize) it. ⿠Be sure to use P-05C for formatting. The microSD card : A microSD card is inserted. formatted using other devices such as personal computers may not work properly. : Data is being read/written. ⿠Note that formatting deletes all content on the microSD card. (Do not remove the microSD card nor turn off the FOMA terminal.) ▶ ▶ Tool microSD : The microSD card is write-protected. ▶ ▶ Refer microSD data : The microSD card cannot be used.
  • Page 93 Copying Data to microSD Card Displaying Data Stored on microSD Card <Example> Copying a still image <Example> Displaying a still image ▶ ▶ ▶ ▶ ▶ Data box My picture Data box My picture ▶ Select a folder. ▶ Select a folder Select an image.
  • Page 94 Backing up Data to microSD Card Sending/Receiving Data by Infrared Communication/iC Communication You can back up Phonebook entries, schedule events, mail messages, memos, bookmarks, and the settings on and You can send or receive data such as Phonebook entries to information about your FOMA terminal collectively onto the or from a device supporting infrared communication function microSD card.

  • Page 95: Sending Data

    ▶ Tool Receive Ir data Receive DOCOMO Connection Manager “DOCOMO Connection Manager” is a software which comes Select “YES”. in handy for DOCOMO’s data communication. It enables easy PC settings according with the terms and conditions of the user’s agreement.

  • Page 96: Support

    “Repairs” counter listed on the back page of this manual or …When you use an AC adapter (option), make sure its connector is a repair counter specifi ed by DOCOMO. fi rmly connected to the FOMA terminal or a desktop holder (option). The “Repairs” counter is available in Japanese only. (See page 20, page 21) …When you use the desktop holder, make sure the connector terminal of the FOMA terminal is not stained. If it is stained, wipe...
  • Page 97 The usable time of the battery is short. Call …Make sure not to leave the FOMA terminal out-of-service-area for Cannot make a call by pressing numeric keys. a long time. If your FOMA terminal is left out-of-service area, it …Make sure Restrict Dialing is deactivated. searches for radio waves to establish communications, consuming …Make sure the lock for “Keypad dial” in Original Lock is released. more power. (See page 43) …The usable time of the battery pack varies depending on the usage …Make sure Dial Lock is deactivated. (See page 42) environment or its remaining life. …Make sure Self Mode is deactivated. …Battery packs are consumables. The usable time slightly shortens Cannot talk. each time you charge the battery. If the usable time becomes (“ ” does not disappear even if you move to another place. extremely short as compared with the default state even if fully You cannot make or receive a call, though the radio wave charged, purchase the specifi...
  • Page 98 “Shop name and date of purchase”, keep the warranty card in a safe (the damages of liquid crystal, connector, etc.), the repair cost is place. If you notice that necessary items of the warranty card are charged even within the warranty period. not filled in, immediately contact the shop where you purchased the ・ The cost for troubles caused by the use of devices and FOMA terminal from. The term of the warranty is one year from the consumables other than those specified by DOCOMO is charged date of purchase. even within the warranty period. ⿠All or part of this product including the accessories may be modified ■Repairs may not be carried out in the following cases: for improvement without notice. ・ When exposure to water is found at our repair counter (Example: When the moisture detection sticker has reacted) After-sales Services ・ When, as a result of inspection at our repair center, corrosion is ◎When there is a problem with the FOMA terminal...
  • Page 99 ・ To put stickers, etc. onto the liquid crystal or keys terminal is in trouble as a result of your check, contact the ・ To decorate the FOMA terminal using adhesives “Repairs” counter listed on the back page of this manual. ・ To replace the coverings etc. with those of other than DOCOMO The “Repairs” counter is available in Japanese only. genuine products ⿠To connect to “ｉモード故障診断サイト (i-mode Fault ・ Repairs of troubles or malfunctions resulting from the Diagnosis Site)” [in Japanese only]...

  • Page 100: Updating Software

    If you need to update the software programs, the DOCOMO website and “お客様サポート (User support)” in Japanese iMenu lets you know information about updating software programs. There are three kinds for updating software programs;...
  • Page 101 Start Software Update from Icon Start Software Update from Menu Select “Update notification icon” on the ▶ Setting ▶ Other setting Stand-by display. ▶ Software Update Enter your Terminal Security Code ▶ Select “Update”. Update notification icon Check whether you need to update software programs. Go to step 2 of “Start Software Update from Icon”...

  • Page 102: Scanning Function

    Displays for scanning results Scanning Function ■About the display for scanned problem elements You can detect data or application programs, which might A warning display appears when problematic data is found. Press i( cause troubles, from among those downloaded to your FOMA ) from the warning display to show the name of the terminal, and then can delete the data or stop starting the...

  • Page 103: Options And Related Devices

    Some products may not be dealt in depending on the area. For details, consult a handling counter such as a docomo Shop. For details on options, refer to the user’s manuals of respective options and related devices. ・ Battery Pack P20 ・...

  • Page 104: Appendix

    Appendix Area Mail setting Auto Deco-mail setting Function List Mail setting Check settings Reset Execute “Resetting the Function Settings to Default” on page 44 for the items indicated by to return to the respective iMenu/Search defaults. Bookmark Inbox Screen Memo Outbox Browsing history Draft...
  • Page 105 iαppli run info Trace info My picture Auto-start setting MUSIC Disp. software info Music&Video Channel i-Widget overseas use imotion/Movie i-Widget sound effect Melody AUTO-GPS preferred set Content package iαppli setting i-αppli call settings My document iαppli volume Kisekae Tool Preferred tone Machi-chara αBacklight Chara-den...
  • Page 106 Reference history Data Security Service Update images Common phrases Phrases/Store word Update setting info Store word Setting/History Download dictionary Refer microSD data Contact DOCOMO microSD Backup/Restore Search phonebook Guide Add to phonebook Voice recorder Phonebook UIM operation Device list Phonebook set./Check...
  • Page 107 Dial/Receive setting Missed call notice Call forwarding Visual preference Call waiting Select image English guidance Auto redial as voice Remote access Other network serv. Videophone setting Ntfy switch-mode Multi Number Reject videophone Dual network Hands-free switch Additional service V.phone while packet OFFICEED Call duration/charge Kisekae Tool setting...
  • Page 108 Ring volume eco mode Select ring tone eco mode setting Other sound setting Battery eco mode autostart Sound/Vib./Manner Vibrator setting Use history Manner mode setting Battery level Stereo&3D sound USB mode Machi-chara chat set. Bluetooth Backlight External connection Headset microphone Backlight/Illum.
  • Page 109 Profile Location history Map setting IC card content GPS button setting DCMX Location request set. ToruCa AUTO-GPS IC card lock Map&GPS set./history IC card lock setting Positioning mode set. IC lock (power-off) Register LCS client ToruCa settings Service setting Setting Receive ToruCa Serv.
  • Page 110 Main Specifications Recording Number of Approx. 1,400 max. (default) recordable still ■Handset ※1 images Model P-05C Number of For Digicam Mode in Continuous setting Dimensions (when closed) Height: Approx. 116 mm still images 3M: 8 2M Wide: 8 Width: Approx. 52 mm for continuous 2M: 8 Stand-by: 8 Depth: Approx. 17.7 mm shooting For Continuous Mode (at thickest point: Approx. 24 mm) VGA: 4 QVGA: 5 to 10 QCIF: 5 to 20 Sub-QCIF: 5 to 20 Weight (with the battery pack Approx. 149 g...
  • Page 111 ⿠The maximum file size for continuous recording is up to 2 Gbytes <Moving picture (Movie mode)> under SD-VIDEO specifications. File format (Extension) MP4, ASF (3gp, asf) ■Number of savable/registerable items in FOMA terminal ※1※3 Recordable time to P-05C Approx. 30 seconds max. ※4 Number of savable/ Recordable time to the microSD Approx. 180 minutes max. Function registerable items card (2 Gbytes)

  • Page 112: Mobile Phone

    The World Health Organization has stated that present scientific Specific Absorption Rate (SAR) of information does not indicate that there are harmful effects attributed Mobile Phone to the use of mobile devices. They recommend that if you are worried about your exposure then you can limit your usage or simply use a SAR Certification Information hands-free kit to keep the mobile device away from the head and body. Please refer to the WHO website if you would like more detailed This model P-05C mobile phone complies with Japanese technical information. regulations and international guidelines regarding exposure to radio http://www.who.int/docstore/peh-emf/publications/facts_press/fact_ waves. english.htm This mobile phone was designed in observance of Japanese technical Please refer to the websites listed below if you would like more detailed regulations regarding exposure to radio waves* and limits to exposure information regarding SAR. to radio waves recommended by a set of equivalent international guidelines. This set of international guidelines was set out by the Ministry of Internal Affairs and Communications Website: International Commission on Non-Ionizing Radiation Protection http://www.tele.soumu.go.jp/e/sys/ele/index.htm (ICNIRP), which is in collaboration with the World Health Organization Association of Radio Industries and Businesses Website: (WHO), and the permissible limits include a substantial safety margin http://www.arib-emf.org/index02.html (In Japanese only) designed to assure the safety of all persons, regardless of age and NTT DOCOMO, INC. Website: health condition. http://www.nttdocomo.co.jp/english/product/sar/ The technical regulations and international guidelines set out limits for Panasonic Mobile Communications Co., Ltd. Website:...

  • Page 113: European Rf Exposure Information

    The exposure standard for wireless mobile phones employs a unit of Declaration of Conformity measurement known as the Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency The product “P-05C” is declared to conform with the essential bands. Although the SAR is determined at the highest certified power requirements of European Union Directive 1999/5/EC Radio and level, the actual SAR level of the phone while operating can be well Telecommunications Terminal Equipment Directive 3.1(a), 3.1(b) below the maximum value. This is because the phone is designed to and 3.2. The Declaration of Conformity can be found on http:// operate at multiple power levels so as to use only the power required panasonic.net/pmc/support/index.html.

  • Page 114: Important Safety Information

    station antenna, the lower the output. HOSPITALS Before a phone model is available for sale to the public, it must be Mobile phones should be switched off wherever you are requested tested and certified to the FCC that it does not exceed the limit to do so in hospitals, clinics or health care facilities. These requests established by the U.S. government-adopted requirement for safe are designed to prevent possible interference with sensitive medical exposure. The tests are performed in various positions and locations equipment. PETROL STATIONS (for example, at the ear and worn on the body) as required by FCC for each model. The highest SAR value for this model phone as reported Obey all posted signs with respect to the use of wireless devices to the FCC when tested for use at the ear is 1.010 W/kg, and when or other radio equipment in locations with flammable material and worn on the body in a holster or carry case, is 0.412 W/kg. (Body-worn chemicals. Switch off your wireless device whenever you are instructed measurements differ among phone models, depending upon available to do so by authorized staff. accessories and FCC requirements). While there may be differences INTERFERENCE between the SAR levels of various phones and at various positions, Care must be taken when using the phone in close proximity to they all meet the U.S. government requirement. personal medical devices, such as pacemakers and hearing aids. The FCC has granted an Equipment Authorization for this model phone Pacemakers with all reported SAR levels evaluated as in compliance with the FCC Pacemaker manufacturers recommend that a minimum separation of RF exposure guidelines. SAR information on this model phone is on 15 cm be maintained between a mobile phone and a pacemaker to file with the FCC and can be found under the Display Grant section at avoid potential interference with the pacemaker. To achieve this use the http://www.fcc.gov/oet/ea/fccid/ after search on FCC ID UCE211039A. phone on the opposite ear to your pacemaker and do not carry it in a For body worn operation, this phone has been tested and meets the breast pocket. FCC RF exposure guidelines when used with an accessory designated Hearing Aids for this product or when used with an accessory that contains no metal Some digital wireless phones may interfere with some hearing aids. In...

  • Page 115: Intellectual Property Right

    ⿠microSDHC Logo is a trademark of SD-3C, LLC. permission from the copyright holder except for when the copy or quote is for personal use that is allowed by the copyright law. ⿠“Multitask” is a registered trademark of NEC Corporation. Note that it may be prohibited to shoot or record live performances ⿠“AXIS Font” is a trademark of AXIS Inc., and the “AXIS” font is a font or exhibitions even for personal use. Make sure that you refrain from developed by Type Project Inc. shooting portraits of other persons and distributing such portraits over ⿠This product contains NetFront Browser, NetFront the Internet without consent, as this violates portrait rights. Document Viewer and NetFront Sync Client of ACCESS CO., LTD. Trademarks ACCESS, the ACCESS logo, and NetFront are registered trademarks or trademarks of ACCESS CO., LTD. in the ⿠“FOMA”, “i-mode”, “i-αppli”, “i-motion”, “Deco-mail”, “Chara-den”, United States, Japan and/or other countries. “ToruCa”, “mopera”, “mopera U”, “WORLD CALL”, “DCMX”, “i-area”, Copyright © 2011 ACCESS CO., LTD. All rights reserved. “WORLD WING”, “OFFICEED”, “2in1”, “docomo PRIME series”, and the logos of “i-mode”, “i-αppli”, and “Music&Video Channel” are ⿠QR code is a registered trademark of Denso Wave Inc. trademarks or registered trademarks of NTT DOCOMO, INC. ⿠Google and Google Map for Mobile are trademarks of Google Inc. ⿠Powered by Mascot Capsule ® /Micro3D Edition™ ⿠“Catch Phone (Call waiting service)” is a registered trademark of ® Mascot Capsule is a trademark of HI CORPORATION. Nippon Telegraph and Telephone Corporation. ⿠“Blu-ray Disc” and “Blu-ray” are trademarks of the Blu-ray Disc ⿠McAfee ® is registered trademarks or trademarks of McAfee, Inc. and/ Association. or its affiliates in the US and/or other countries. ⿠Wi-Fi and Wi-Fi CERTIFIED Logo are registered marks of the Wi-Fi ⿠Rovi, G-GUIDE, G-GUIDE MOBILE and G-Guide related...
  • Page 116 ⿠The Bluetooth Others ® word mark and logos are owned by the Bluetooth SIG, INC. and any use of such marks by NTT DOCOMO, Inc. is ⿠This software is based in part on the work of the Independent JPEG under license. Other trademarks and trade names are those of their Group. respective owners. ⿠This product contains IrFront of ACCESS CO., LTD. IrFront is a ⿠MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS registered trademark or trademark of ACCESS CO., LTD. in the and Thomson. United States, Japan and/or other countries. ⿠This product is licensed under the MPEG-4 patent portfolio license, ⿠The IrDA ® Feature Trademark is owned by the Infrared Data AVC patent portfolio license and VC-1 patent portfolio license for the Association and used under license therefrom. personal use of a consumer or other uses in which it does not receive ⿠Contains Adobe ® ® ® Flash Player, Adobe remuneration to ® ® ® Flash Lite and Adobe Reader (i) encode video in compliance with the MPEG-4 Visual Standard, AVC Mobile technology by Adobe Systems Standard and VC-1 Standard (“MPEG-4/AVC/VC-1 Video”) and/or Incorporated. (ii) d ecode MPEG-4/AVC/VC-1 Video that was encoded by a consumer Adobe Flash Player Copyright © 1996-2011 Adobe Systems...
  • Page 117 ⿠Content providers are using the digital rights management - Neither the name of the HTS working group nor the names of its technology for Windows Media contained in this device (“WM-DRM”) contributors may be used to endorse or promote products derived to protect the integrity of their content (“Secure Content”) so that from this software without specific prior written permission. their intellectual property, including copyright, in such content is not THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS misappropriated. This device uses WM-DRM Software to play Secure AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED Content (“WM-DRM Software”). If the security of the WM-DRM WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED Software in this device has been compromised, owners of Secure WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A Content (“Secure Content Owners”) may request that Microsoft PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL revoke the WM-DRM Software’s right to acquire new licenses to THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR copy, display and/or play Secure Content. Revocation does not alter ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR the WM-DRM Software’s ability to play unprotected content. A list CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, of Revoked WM-DRM Software is sent to your device whenever you PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS download a license for Secure Content from the Internet or from a OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) PC. Microsoft may, in conjunction with such license, also download HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, revocation lists onto your device on behalf of Secure Content WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING Owners. NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE ⿠The HMM-Based Speech Synthesis Engine embedded in this product USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY uses the Simplified BSD License. OF SUCH DAMAGE. ---------------------------------------------------------- The HMM-Based Speech Synthesis System (HTS) hts_engine API developed by HTS Working Group( http://hts-engine.sourceforge.net/) ---------------------------------------------------------- Copyright ©...

  • Page 118: Index

    GPS ............64 DIGA/DLNA link ........87 Call/charging indicator ......4 GPS antenna ...........5 Display ..........4, 24 Caller ID notifi cation ......23 GPS compatible i-αppli ......65 DOCOMO connection manager ...93 Call forwarding service ......50 Guide .............32 Call rejection setting ......44 Call waiting service ......50...
  • Page 119 MUSIC player ........76 MUSIC player display ......76 Handwriting photo/memo ....88 Keypad lock ..........43 Music&Video channel ......75 Holding ..........45 Keypad sound........36 Home menu ..........31 Kisekae tool ..........38 Koe-no-takuhaibin ........46 Navi ............65 Navigation displays ......26 i-αppli ............77 Network security code ......41 IC card lock ...........42 Light sensor ..........4 Network services ........49 iC communication ........92...
  • Page 120 Delete data .........59 Timer recording ........74 Edit phonebook .........59 ToruCa ...........80 SAR .............110 Search phonebook ......45 Touch menu ..........31 Scanning function.......100 Picture album ........68 Touch operation guide ......31 Schedule ..........82 Picture jump ..........69 Touch panel ........4, 29 Screen lock ...........30 PIN1 code ..........41 Trademarks .........113 Screen memo ........62 PIN1 code entry set ......42 Troubleshooting ........94...
  • Page 121 ｉMenu お客様サポート (User support) お申込 ・ お手続き (Applications/Procedures) From i-mode ▶ ▶ 各種お申込 ・ お手続き (Respective applications/procedures) ▶ Packet communication charges free 各種お申込 ・ お手続き From PC My docomo (http://www.mydocomo.com/) ▶ ⿠“お客様サポート (User support)” and My docomo are available in ⿠If you do not have or you have forgotten your “Network Security Japanese only. Code” or “docomo ID/password”, contact “General Inquiries” listed ⿠You will need your “Network Security Code” for the access from i-mode. on the back page of this manual. ⿠No packet communication charges are incurred for the access from ⿠You may not be able to access the site depending on the details of i-mode. Accessing from overseas will incur charges.
  • Page 122 ● If you lose your FOMA terminal or have it stolen, immediately take the steps necessary for suspending the use of the FOMA terminal. ● If the FOMA terminal you purchased is damaged, bring your FOMA terminal to a repair counter specified by DOCOMO after returning to Japan.
  • Page 123 ● Please confi rm the phone number before you dial. ● For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo Shop etc. near you on the NTT DOCOMO website or the i-mode site.
  • Page 124 Installing DOCOMO Connection Manager........

  • Page 125: Data Communication Available From Foma Terminal

    FOMA terminal to an access point which does not support HIGH-SPEED or the terminal is outside the FOMA High-Speed Area, or when you use the device which does not support High-Speed such as DOCOMO’s PDA “sigmarion Ⅲ”. ≥The packet communication is charged according to the amount of data you sent and received. Note that you are charged a high communication fee for the massive data communication such as browsing Internet websites having many images or downloading data files.

  • Page 126: Before Using Data Communication

    ≥The FOMA terminal does not support the FAX communication. ≥You can perform data communications by connecting the FOMA terminal with DOCOMO’s PDA “sigmarion Ⅲ”. ≥When you perform data communication by using Bluetooth function, the high speed communication is applied to the FOMA terminal.

  • Page 127: Operating Environment

    When using Wi-Fi communication: Wireless LAN Specification IEEE802.11b/g compliant Display resolution 800 x 600 dots, high color 16 bits or more recommended. ≥For DOCOMO Connection Manager, display resolution 1024 x 600 dots or more (1024 x 768 dots or more recommended)

  • Page 128: Setup Flow For Data Transfer (Obex™ Communication)

    When you use the FOMA USB Cable with Charge Function 02 (option), install the FOMA communication configuration file. Install the “FOMA communication configuration file” (driver). (See page 6) ≥Download the FOMA communication configuration file from the DOCOMO website and install. Data transfer Setup Flow for Data Communication The following outline shows a setup flow for packet communication or 64K data communication.
  • Page 129 Connecting PC and the FOMA Terminal The following steps explain how to connect the FOMA USB Cable with Charge Function 02 (option). Check the direction of the Connector terminal connector terminal of the FOMA External connector terminal, then straight insert the (Face up the engraved external connector of the FOMA surface of the connector...

  • Page 130: Installing Foma Communication Configuration File (Driver)

    ≥End all the programs resident on your personal computer before installing the FOMA communication configuration file (driver). Download the FOMA communication configuration file (driver) from the DOCOMO website. Double-click “exe” file of the downloaded FOMA communication configuration file (driver) to execute. Decompress it into the desired folder.
  • Page 131 For Windows 7 “ [スタート (Start)]” 1Open “デバイスとプリンター (Devices and printers)”. Open “docomo PRIME series P-05C” 1Click the “ハードウェア (Hardware)” tab. Confirm the installed driver names. Confirm that all driver names are displayed. ≥The COM port number varies depending on the personal computer you use.
  • Page 132 Click each device, then confirm the installed FOMA communication configuration file (driver) names. Confirm that all FOMA communication configuration file (driver) names are displayed under “ポート (COMとLPT) [Port (COM/LPT)]”, “モデム (Modem)”, and “ユニバーサル シリアル バス コントローラ (Universal serial bus controller)”. ≥The COM port number varies depending on your personal computer.
  • Page 133 Uninstall FOMA Communication Configuration File (Driver) When uninstalling the “FOMA communication configuration file” (driver) is necessary (such as when upgrading the version), perform the operation below. ≥Operate as the user who has the PC administrator right. If the FOMA terminal is connected to a personal computer via the FOMA USB Cable with Charge Function 02 (option), disconnect the FOMA USB Cable with Charge Function 02.

  • Page 134: Preparing Bluetooth Communication

    Preparing Bluetooth Communication You can make data communication by connecting a Bluetooth communication compatible personal computer wirelessly to your FOMA terminal. Connect to Personal Computer for the First Time To connect a personal computer to the FOMA terminal for the first time, register the personal computer to the FOMA terminal.
  • Page 135 Confirm the Modem Before setting communication, confirm the name and COM port number of the modem used for connecting the dial-up service. For Windows 7 “ [スタート (Start)]” 1Open “デバイスとプリンター (Devices and printers)”. Open “P05C”1Click the “ハードウェア (Hardware)” tab. Confirm the modem name or COM port number. For Windows Vista, Windows XP “...

  • Page 136: Preparing Wi-Fi Communication

    Preparing Wi-Fi Communication You can make packet communication by connecting a Wi-Fi compatible personal computer to your FOMA terminal via Wi-Fi. Set the FOMA Terminal to Access Point Mode m1Tool1Wi-Fi1Access point mode1Start connecting ≥You can start Access point mode also by m1Setting1External connection1Wi-Fi1Access point mode1Start connecting. ≥When Access point mode starts, “...
  • Page 137 Enter ESSID for the FOMA terminal in the “ネットワーク名 (Network name)” column, set the security type for the FOMA terminal in the “セキュリティの種 類 (Security type)” column, and click “次へ (Next)”. ≥“WPA2-パーソナル (WPA2-personal)” under “セキュリティ の種類 (Security type)” has the same meaning of “WPA2-PSK”.

  • Page 138: Docomo Connection Manager

    DOCOMO Connection Manager “DOCOMO Connection Manager” is a convenient software program to perform flat-rate data communication and volume charging data communication. It enables you to sign up for “mopera U” and easily make PC settings according to your contract situation. It also enables you to check the estimate data traffic and usage amount with the charge counter function.

  • Page 139: Before Installing Docomo Connection Manager

    ・FOMA PC設定ソフト (FOMA PC configuration software) ・FOMAバイトカウンタ (FOMA byte counter) When you use Mzone (DOCOMO public wireless LAN service) with this software program, uninstall the following public wireless LAN connection software programs. ※You cannot use Mzone when they are simultaneously installed: ・U公衆無線LANユーティリティソフト...

  • Page 140: Installing Docomo Connection Manager

    When MSXML6 and Wireless LAN API are not installed on the Windows XP environment, you need to install them before installing “DOCOMO Connection Manager”. When a confirmation display appears, click “Install” and install MSXML6/Wireless LAN API. When you restart Windows after installation of MSXML6/Wireless LAN API is completed, installation of “DOCOMO Connection Manager” automatically starts.
  • Page 141 Confirm the licensing contract contents. If you agree with the contents, select “使用許諾契約の条 項に同意します (Agree with the licensing contract contents)” and click “次へ (Next)”. Confirm the installation destination folder, then click “次へ (Next)”. Click “インストール (Install)”. Installation starts. Click “完了 (Finish)”. Installation is completed.

  • Page 142: Starting Docomo Connection Manager

    When this is the first start-up, the setting wizard appears automatically. Hereafter, proceed operation/settings following the instruction of software to complete the preparation to access the Internet. For details, refer to “ドコモ コネクションマネージャ操作マニュアル (DOCOMO Connection Manager operation manual)”. ■When you disconnect the communication line You cannot disconnect the communication line only by exiting a browser software or e-mail software.

  • Page 143: Setting Dial-Up Network

    AT command is required. “Hyper Terminal”, which is attached to Windows as the standard software, is used here for explanation. When using DOCOMO Internet access service “mopera U” or “mopera”, you do not need to set an access point name (APN) (see page 22).
  • Page 144 (driver). The confirmation method varies depending on the operating system of your personal computer. ≥When using DOCOMO Internet access service “mopera U” or “mopera”, you do not need to set an access point name (APN); therefore, you do not need to confirm the modem.
  • Page 145 Open the “モデム (Modem)” tab, confirm the COM port number in the “接続先 (Access point)” field of “FOMA P05C”, then click “OK”. ≥When connecting wirelessly using Bluetooth communication, confirm the COM port number of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker in the “接続先...
  • Page 146 Set an Access Point Name (APN) This section explains how to set an access point name (APN) for packet communication. You can register up to 10 access point names (APNs), which are managed with cid1 to cid10 (see page 24). When using “mopera U”...
  • Page 147 Select a connection method. <When you can select the COM port number of “FOMA P05C”> Select the COM port number with which you install the “FOMA P05C” in the “接続方法 (Connection method)” field, then click “OK”. Then, go to step 6. ≥Here, “COM3”...
  • Page 148 Confirm that “OK” appears on the display. “ファイル (File)” menu1Select “ハイパーターミナルの終了 (Exit Hyper Terminal)” to exit Hyper Terminal. ≥If the message “現在、接続されています。切断してもよろしいですか? (Currently connected. Do you want to disconnect this line?”) appears, select “はい (Yes)”. ≥The message “セッションXXXを保存しますか? (Do you want to save session XXX?)” then appears. You do not need to especially save that session.
  • Page 149 Confirm that “OK” appears on the display. Information ≥When using DOCOMO Internet access service “mopera U” or “mopera”, you need to set your caller ID to be “notified”. ≥If the entered AT command is not displayed, enter “ATE1 ”. ■Specifying “caller ID notified/not notified” in dial-up network Also by dial-up network setting (see page 26), you can add “186 (notify)”...
  • Page 150 Set Dial-up Network for Windows 7 “ [スタート (Start)]” 1Open “コントロールパネル (Control panel)” 1“インターネットへの接続 (Connection to Internet)” 1Click “ダイヤルアップ接続 (Dial-up connection)”. ≥After the access point has been set, the confirmation display appears asking whether the existing connection is to be used.
  • Page 151 Highlight the access point which is finished with setting, and select “プロパティ (Property)” after the right click 1Click the “全般 (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “モデム (Modem) - FOMA P05C” or “モデム...
  • Page 152 Set Dial-up Network for Windows Vista “ [スタート (Start)]”1“接続先 (Access point)”1Click “接続または ネットワークをセットアップします (Setup the connection or network)”. Select “ダイヤルアップ接続を セットアップします (Setup the dial-up connection)”, then click “次へ (Next)”. If the display for selecting a modem appears, click “FOMA P05C”. ≥When connecting wirelessly using Bluetooth communication, put a check mark for only the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker.
  • Page 153 Click the “全般 (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “モデム (Modem) - FOMA P05C” or “モデム (Modem) - the name of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker”...
  • Page 154 Set Dial-up Network for Windows XP “スタート (Start)”1“すべてのプログラム (All programs)” 1“アクセサリ (Accessories)”1“通信 (Communications)” 1Open “新しい接続ウィザード (New connection wizard)”. When the “新しい接続ウィザード (New connection wizard)” display appears, click “次へ (Next)”. Select “インターネットに接続する (Connect to the Internet)”, then click “次へ (Next)”. Select “接続を手動でセットアップする (Manually set up the connection)”, then click “次へ...
  • Page 155 Enter an access point number in the “電話番号 (Phone number)” field, then click “次へ (Next)”. ≥When connecting to “mopera U”, enter “¢99¢¢¢3#” as the access point number. See page 24 for access point numbers other than “mopera U”. Enter the user name and password supplied from your Internet service provider or network administrator in the...
  • Page 156 Click the “全般 (General)” tab to confirm the setting contents. When two or more modems are connected to your personal computer, confirm that “モデム (Modem) - FOMA P05C” or “モデム (Modem) - the name of the in-use Bluetooth linked standard modem or Bluetooth modem provided by a Bluetooth device maker”...

  • Page 157: Making Dial-Up Connection

    Making Dial-up Connection Making Dial-up Connection for Windows 7 Perform the operation on page 5 to connect the FOMA terminal to your personal computer. “ [スタート (Start)]”1Open “コントロールパネル (Control panel)” 1Click “インターネットへの接続 (Connection to Internet)”. Check “はい、既存の接続を選びま す (Yes, I choose the existing connection)”, then select the access point, and click “次へ...
  • Page 158 Making Dial-up Connection for Windows Vista Perform the operation on page 5 to connect the FOMA terminal to your personal computer. “ [スタート (Start)]”1Open “接続先 (Access point)”. Select access point and click “接続 (Connect)”. Confirm the contents and click “ダイヤル (Dial)”. ≥When connecting to “mopera U”...
  • Page 159 Making Dial-up Connection for Windows XP Perform the operation on page 5 to connect the FOMA terminal to your personal computer. “スタート (Start)”1“すべてのプログラム (All programs)” 1“アクセサリ (Accessories)”1“通信 (Communications)” 1Open “ネットワーク接続 (Network connection)”. Open the access point to be used. Select the access point icon of the ISP name (see page 30) you specified in “Set Dial-up Network”, then “ネットワークタ...

  • Page 160: Connecting And Disconnecting

    Your personal computer ･ Confirm whether your personal computer satisfies the operating environment (see page 3). cannot recognize “P-05C” ･ Confirm whether “FOMA communication configuration file” (driver) is installed in your personal computer. ･ Confirm whether the FOMA terminal is connected to your personal computer and powered on.

  • Page 161: At Command

    AT Command AT commands are used to specify and modify the functions of the FOMA terminal through the personal computer. ※The following abbreviations are used in the AT command list: [AT]: Commands which are available at the FOMA P05C Command Port. [M]: Commands which are available in the FOMA P05C (modem).

  • Page 162: At Command List

    AT Command List Command execution AT command Outline Parameter/Explanation example Re-executes the last executed − command. No carriage return is required. AT%V Displays the version of the AT%V − FOMA terminal. Ver1.00 AT&Cn Selects the operating conditions n=0: CD is always ON. AT&C1 of the circuit CD signal sent to n=1: CD varies according to the carrier of the other...
  • Page 163 Command execution AT command Outline Parameter/Explanation example AT¢DGPIR=n This command is valid at dialing/ n=0: Uses the APN as it is. (default) AT¢DGPIR=0 receiving calls. n=1: Adds “184” to the APN. (always not notify) In the dial-up network setting, n=2: Adds “186” to the APN. (always notify) AT¢DGPIR? you can add “186”...
  • Page 164 Command execution AT command Outline Parameter/Explanation example AT+CGREG=n Sets whether the network n=0: Not notified. (default) AT+CGREG=1 registration state is notified. n=1: Notified at switching between the inside and Displays whether you are inside outside of the service area. (set to “Notified”) or outside the service area (Inquiry) AT+CGREG?
  • Page 165 Command execution AT command Outline Parameter/Explanation example AT+COPS=n,2,m Selects the carrier to be n=0: Automatic (searches the network and switches the AT+COPS=1,2,"44F001" connected. network operator automatically) (default) n=1: Manual (connects to the network operator specified in “m”) n=2: Disconnects the connection to the network operator n=3: Mapping is not performed.
  • Page 166 AT+GMI Displays the manufacturer name AT+GMI − (Panasonic). Panasonic AT+GMM Displays the product name AT+GMM − (FOMA P-05C) of the FOMA FOMA P05C terminal. AT+GMR Displays the version of the AT+GMR − FOMA terminal. Ver1.00 AT+IFC=n,m Selects the flow control method. n: DCE by DTE...
  • Page 167 Command execution AT command Outline Parameter/Explanation example ATIn Displays the ID code. n=0: Displays “NTT DoCoMo”. ATI0 n=1: Displays the product name. (same as +GMM) NTT DoCoMo n=2: Displays the version of the FOMA terminal. (same as +GMR) ATI1 n=3: Displays ACMP information element.
  • Page 168 Command execution AT command Outline Parameter/Explanation example ATZn Resets the setting to the Only n=0 is specifiable. (Can be omitted) (In online) contents of the nonvolatile memory. If this command is NO CARRIER entered during communication, (In offline) the line is disconnected. AT¥Sn Displays the contents of the each Only n=0 is specifiable.
  • Page 169 ≥Command name: +CGEQMIN=[parameter] ･ Outline This command registers the reference value to judge whether the system permits QoS (Quality of service) reported from the network at establishment of the packet communication. You can specify four setting patterns described in the command execution example below. ･...

  • Page 170: Result Codes

    Disconnection Reason List ■64K Data Communication Value Reason The specified number does not exist. The line was normally disconnected. Cannot communicate because the other party is communicating. Dialed but no response has come in within the specified duration. Cannot communicate because the other party is dialing. The other party rejected to receive the call.
  • Page 171 For &E1 Numeric Character notation Connection speed notation CONNECT 1200 1,200bps CONNECT 2400 2,400bps CONNECT 4800 4,800bps CONNECT 7200 7,200bps CONNECT 9600 9,600bps CONNECT 14400 14,400bps CONNECT 19200 19,200bps CONNECT 38400 38,400bps CONNECT 57600 57,600bps CONNECT 115200 115,200bps CONNECT 230400 230,400bps CONNECT 460800 460,800bps...
  • Page 172 Kuten Code List...
  • Page 173 <How to read Kuten Code List> First enter the number for “Kuten digit 1 to 3”, and enter the number for “Kuten digit 4”. ≥Some characters in Kuten Code List may appear different on the display. Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit...
  • Page 174 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 讃 賛 酸 餐 斬 暫 残 【 た 】 函 箱 硲 箸 肇 筈 櫨 幡 肌 【...
  • Page 175 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 揚 揺 擁 曜 楊 様 洋 溶 熔 用 圷 圸 坎 圻 址 坏 坩 埀 垈 坡 椢...
  • Page 176 Kuten Kuten Kuten Kuten digit 4 Kuten digit 4 Kuten digit 4 digit digit digit 1 to 3 1 to 3 1 to 3 竊 竍 竏 竕 竓 站 竚 竝 竡 竢 誨 誡 誑 誥 誦 誚 誣 諄 諍 諂 鷯...

Table of Contents