Creating And Editing The Speech Test Table - otometrics AURICAL Aud Reference Manual

Pc-controlled audiometer for testing a person's hearing
Hide thumbs Also See for AURICAL Aud:
Table of Contents

Advertisement

2 Navigating in the OTOsuite Audiometry Module
If you perform a test which is not available in a predefined Speech table, a speech row is created automatically. This tem-
porary row will exist as long as there is stored test data for that measurement setup.
2.10.1

Creating and editing the speech test table

You can create the speech test table if a predefined test is not available, or if you wish to change settings on the fly.
1. Select ear, transducer, stimulus type, routing, test type, and speech material.
2. To permanently add the test row to the table, you must
pin it to the table,
save it to a user test.
Pinning the test
You can pin one or several rows to the table,one by one. To do so, right-click the active row in the speech table,
Configure > Pin Test
select
When you have pinned the test row to the table, you can change the order of the pinned tests. To do so, right-click
the active row in the speech table, select
You can also assign a different speech material or stimulus source. To do so, make your stimulus selection, right-click
the active row in the speech table, and select
Saving the table to a user test
When you have pinned the new test rows to the speech table, you
must save it to a user test or to your start-up settings.
Open the
start-up settings.
Saving different speech tables to specific user tests has several benefits:
You can have identical test setups, but use different speech materials for different patient groups (e.g. different lan-
guages, pediatric materials)
You can use different test setups depending on the task (e.g. diagnosis/hearing aid verification)
You can load and include several different speech tables when you test a patient. Rows with no data will be discarded
(right-click in the row to select
user tests).
50
.
Tools > Options
dialog and click to save as a user test or as
Did not test
Configure > Move Up/Move Down
Configure > Assign selected stimulus
Could not test
or
if you wish to retain blank rows before you load additional
.
.
Otometrics - AURICAL Aud

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents