Speech Testing - Tabular View - otometrics AURICAL Aud Reference Manual

Procedure
1. Browse to the folder containing the WAVE (.wav) file or files you wish to adjust to a specific level.
2. Play the calibration file from the Speech player.
3. Use the dials in the
meter.
4. Open the Play list in the Speech player and click Save Source A & B level in this folder.
5. A file called "0.speechlevel" is created in this folder.
The next time you play any file from this folder, it will be calibrated to the level set in the "0.speechlevel" file.
2.10

Speech testing - tabular view

Selecting tabular or graphical view
In the Speech test screen of the OTOsuite Audiometry module you can use either tabular view or graphical view.
1. To select the view you wish to use, select
View or
AURICAL Aud is intended for use with predefined speech protocols
that are loaded automatically when you select a user test.
You can have a full overview and instantly select measurement
type, ear, transducer, stimulus type, routing, and speech material.
• If you wish to make manual changes on the fly, use the control
panel to select.
The predefined tests are incorporated as rows in the speech table.
• To select a predefined test, simply click the button in the
material.
Otometrics - AURICAL Aud
Monitor and Level
Graphical View .
section of the control panel to adjust the levels to zero, as seen on the VU
Tools > Options > Audiometry
Test
colum. This will load all the speech settings and speech
2 Navigating in the OTOsuite Audiometry Module
> Speech > Speech View Mode > Tabular
49