Mitsubishi Electric SD420U Service Manual page 45

Modification and installation of
DDP2000.inf
1. Exit DLP Composer Lite v3.6 Setup.exe, if running.
2. Select [Program Files]-[DLP Composer Lite] and open
the file named ddp2000.inf using a text editor.
Note: Make a backup copy of the original ddp2000.inf file
because it may be used with other products.
3. Modify [Device List] in the text file as follows and then
save it.
[DeviceList]
; The Vendor ID is 0451, and the Product ID is 2000
"DDP2000 (i00)"=Install, USB\VID_0451&PID_2000&Mi_00
"XD420 (i00)"=Install, USB\VID_0784&PID_5001&Mi_00
"SD420 (i00)"=Install, USB\VID_0784&PID_5001&Mi_00
"XD430 (i00)"=Install, USB\VID_0784&PID_5001&Mi_00
"SD430 (i00)"=Install, USB\VID_0784&PID_5001&Mi_00
"XD435 (i00)"=Install, USB\VID_0784&PID_5001&Mi_00
4. Right-click the file named ddp2000.inf and select
[Install].
Installing the USB support (for all
platforms)
This projector supports the USB communication interface
designed for DDP2000-based projector. The setup program
contains files necessary for installation of the USB support.
After installing DLP Composer (TM) Lite, select [DLP
Composer TM Lite] from the Start menu and select the icon
named Install DDP2000 USB Driver. (The USB support is
installed.)
When [Hit any key to continue] is displayed on the screen,
press any key on the keyboard and wait for the installation
process to complete.
Preparation
1. Start DLP Composer (TM) Lite. (The dialog shown
below appears.)
2. Put the cursor to [Projector Control].
(The Open dialog appears. When the dialog doesn't
appear, click [Open] in the tool bar.)
Put the cursor to [Projector Control], or click [Open]
in the tool bar.
3. Select [MelcoService_ddp2000_060316a.projector] and
click [Open].
4. Select [Preferences] from the Edit menu.
(The DLP Composer Preferences dialog appears.)
Select [Preferences] from the Edit menu.
5. Select [Communications] and put a checkmark to [USB].
(Select a port to be used.)
6. Set [Vendor] and [Product].
q Select [Communication].
e Set [Vendor] and [Product].
Product name
SD420U/SD430U
XD420U/XD430U
XD435U/XD435U-G
7. Click [OK].
8. Exit DLP Composer (TM) Lite.
- 7 -
wPut a checkmark to [USB].
Vendor Product
0x784 0x5001