Using The Steam Iron - Panasonic NI-WT960 Operating Instructions Manual

Check for the correct water fill
3
3
level with the iron in the Heel rest
position.
4
4
Close the Water Fill Cover.
Note
• Do not overfill the Water Tank. Steam will release through the vents when
the iron is positioned vertically.
• Be sure the Water Fill Cover is closed during use.

Using the steam iron

How to use as a steam iron
1
1
Fill the Water Tank with tap water as described in "How to
fill the Water Tank".
2
2
Position the iron in the Heel rest position
and be sure the Power Switch is set to "
3
3
Plug the Power Plug into a socket.
4
4
Set the Steam/Dry Selector to the Dry
position, and then set the Power switch
to " ".
The Thermostat Operating Indicator Light switches on.
• If the temperature of the Soleplate is high,the light
switches off.
5
5
Preheat the iron until the Thermostat Operating Indicator
Light switches off, usually it takes about 1 minute.
The Thermostat Operating Indicator Light flashes while ironing to indicate
the temperature is being maintained.
".
9