How To Fill The Water Tank; Using The Steam Iron - Panasonic NI-WT980 Operating Instructions Manual

How to fill the Water tank
Before using the iron, check the fabric label.
1
1
Set the Steam/Dry Selector to the Dry
position to avoid water leakage.
2
2
Open the Water Fill Cover, hold the
iron as shown and fill the Water Tank
with tap water up to "MAX" dot (about
350 mL (12.3 ounces)).
• Use the cup for filling.
3
3
Check for the correct
water fill level with the
iron in the Heel rest
position.
4
4
Close the Water Fill Cover.
Note
• Do not overfill the Water Tank. Steam will release through the vents when the
iron is positioned vertically.
• Be sure the Water Fill Cover is closed during use.

Using the steam iron

How to use as a steam iron
1
1
Fill the Water Tank with tap water as described in "How to
fill the Water Tank".
2
2
Position the iron in the Heel rest position
and be sure the Power Switch is set to " ".
3
3
Plug the Power Plug into a household outlet.
10