Table of Contents
Advertisement
HOW TO USE ASA STEAM IRON
ee mene
ssary use a press cloth on top of fabric.
:
:
Temperature selector
T
a) Plug the AC cord into electrical outlet, connect
emperature
Remove the cover case: Place the unit on a firm and stable surface, while pulling
to power supply.
the case lock ouside, lift the cover case to open.
b) Move the Temnperature Select and choose
temperature within the temperature
Steam:scale
人
Set to "2"
selector dial(2-3 scale).
("2"-"3")
Notice: When use regular steam or jet of
Regular steam/
Jet of steam scale
steam, please set the temperature
selector dial
to "3" zone.
Low temperature will lead to water
leakage.
a) Preheat the iron until the indicator light goes out.
Q
b) Press steam button, select steam quantity, and
start ironing.
Notice: The iron should be set on the Power Base securely
for connecting to power supply. While not in use, please set
back Power Base, the Power Base will maintain the selected
temperature. Just put the iron on Power Base, don't put it on
other place.
AC Power Cord Adapter
Steam button (switch as the following )
Notice: The power cord adapter must be
inserted into power base securely.
=
加
@ Remove the tank
Close
Steam
Set tp "3"
a) Press the steam button down to "3" position.
b) Press the water tank release button, take out the
water tank.
How to use the jet of steam feature
@ For fabrics thick materials and with stubborn wrinkles.
@) Pump the jet of steam button several times before
Pump the at jet of
using for the first time at each ironing session.
Same S sconce
® The interval should not less than 2 seconds when
using the jet of steam, to avoid the hot water
dripped from the soleplate.
O
a) Open the water fill cover.
A
@ When using vertical steam, hang the garment on a
b) Fill the tank up to " 满 水 " line.
Notice:
© Observe the volume of water at upright
position, do not overfill above " 满 水 "
indication.
@ Using pure tap water.
a) Close the water fill cover.
b) Re-install the water tank to the main unit.
clothes hanger. Hold the iron away from your body
close to but not touching the fabric. Pull the fabric
tight with your free hand
and after 2 seconds
press the jet of steam button.
Notice: a) When using jet of steam, keep the steam button
in the close position, and set the temperature selector
dial to " 3 " zone, or some water will drop from iron.
b) Never iron clothes on the body or point your iron at
anyone when steaming.
The water volume can be observed very clearly whatever in
vertical or horizontal position. Please pull out the plug when
the volume of water is low. And refill the iron according to
the step 3-5.
Can use vertically
Shake the
water tank
Advertisement
Table of Contents
