Panasonic NI-WT960 Operating Instructions Manual page 5

WARNING
Never modify, disassemble, or repair.
- Doing so may cause ignition or injury due to abnormal operation.
Contact an authorized service center for repair.
Do not immerse the iron in water or other liquids.
- Doing so may cause burns, electric shock or fire due to a short circuit.
To reduce the risk of personal injury, electric shock or fire, please observe the
following:
Always ensure the appliance is operated on an electric power source
matched to the rated voltage indicated on the iron.
Fully insert the Power Plug.
The Power Plug must be unplugged before filling water to the Water
Tank.
Regularly clean the Power Plug to prevent dust from accumulating.
- Disconnect the Power Plug and wipe with a dry cloth.
Immediately stop using and unplug the Power Plug if there is an
abnormality or malfunction.
Examples of abnormalities:
· The iron stops occasionally, the Power Cord or the Power Plug is
abnormally hot or discolored.
· The iron is deformed or smells of burning.
- Refer servicing to authorized service personnel.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with
the iron.
- Failure to do so may cause an accident or injury.
The iron must be used and rested on a flat, stable surface. When
placing the iron on its stand, ensure that the surface on which the
stand is placed is stable.
- If placed on a shaggy rug or other unstable location, the iron may fall
over and cause damage to the rug, injury or burns.
5