Panasonic NI-WT960 Operating Instructions Manual page 7

CAUTION
Do not store the Power Cord coiled with sharp angles.
- This may damage the cord.
Do not repeatedly and quickly press the Power Shot Button.
- If repeating operation over an interval of less than 2 seconds, burns due to
hot water leaks may result.
Only use tap water in the iron.
Do not add perfume, vinegar, starch, descaling agents, ironing aids or
other chemicals in the Water Tank.
- Doing so may cause discoloration in the clothes.
If the shot intensity is low, do not operate the Power Shot Button.
- Doing so may cause burns due to hot water leaks.
Do not tilt or violently move the iron back and forth.
- Doing so may cause burns due to hot water leaks.
To reduce the risk of personal injury, property damage, electric shock or
fire, please observe the following:
Use a dry iron on moist clothing (spray misted).
Disconnect the Power Plug by holding the wire instead of pulling on
the Power Cord.
- Failure to do so may break the wire, and may cause burns, electric shock,
or fire due to a short circuit.
Care should be taken when using the iron.
- Steam emission may cause personal injury.
Test on an inconspicuous area when using with following fabric.
Or, place a cloth over the fabric to prevent marks on the fabric.
· Expensive or specially processed fabrics (velvet, acrylic, nylon,
cashmere, etc.)
· Fabrics that are labeled as "low heat" or "medium heat", or dark colored
fabrics.
Drain water from the Water Tank after use.
- Failure to do so may cause the water to leak out from the Soleplate when
the iron is used next time.
Always unplug the Power Plug during not in use.
- Failure to do so may cause fire, electric shock.
7