Christie DWU1052 Technical User's Manual page 8

Connection to the ports
Connection to the ports
NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the
input ports of the projector are recessed.
►Only the signal that is input from the COMPUTER IN can be output from the
MONITOR OUT port.
A
COMPUTER IN,
D-sub 15pin mini shrink jack
<Computer signal>
• Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive)
• H/V. sync. signal: TTL level (positive/negative)
• Composite sync. signal: TTL level
<Component video signal>
• Video signal: Y with composite sync, Analog, 1.0±0.1Vp-p, 75Ω terminated
Cb/Pb, Analog, 0.7±0.1Vp-p, 75Ω terminated
Cr/Pr, Analog, 0.7±0.1Vp-p 75Ω terminated
• System: 480i@60, 480p@60, 576i@50, 720p@50/60, 1080i@50/60, 1080p@50/60
Pin
Video Red, Cr/Pr
1
Video Green, Y
2
Video Blue, Cb/Pb
3
4 (No connection)
5 Ground
Ground Red, Ground Cr/Pr
6
Ground Green, Ground Y
7
Ground Blue, Ground Cb/Pb
8
DWU1052/DHD1052
User's Manual - Technical
A
B
B
MONITOR OUT
Signal Pin
9 (No connection)
10 Ground
11 (No connection)
A : SDA (DDC data) B : (No connection)
12
13 H. sync / Composite sync.
14 V. sync.
A : SCL (DDC clock) B : (No connection)
15
7
Connection to the ports
⑪ ⑫ ⑬ ⑭
⑥ ⑦ ⑧ ⑨ ⑩
① ② ③ ④
Signal
020-000857-01 Rev. 1 (12-2015)
LIT MAN USR DWU/DHD1052 TECH
⑮
⑤
⑤ ⑮