Salus EP310 Installation Manual page 18

ADV Override
ADV only works in AUTO or ONCE mode. During ADV, press MODE once to cancel ADV and go back to AUTO
/ONCE mode after LCD backlight is turned off. +1Hr override and ADV cannot co-exist in same channel.
During ADV mode, when +1Hr is pressed, override mode will cancel ADV mode then change to Boost mode.
If +1Hr override (Boost) is running, then ADV is selected, ADV will be activated and the previous +1Hr override
will be cancelled.
ADV Override for Heating CH1, CH2
1 MODE
3 sec
2 MODE
MODE
Long press Mode while in Auto
or Once to enter ADV override
Mode for CH1.
1 MODE
2 MODE
3 sec
MODE
Long press Mode while in Auto
or Once to enter ADV override
Mode for CH2.
ADV Override for Hot Water
1 MODE
2 MODE
MODE
3 sec
Long press Mode while in
Auto or Once to enter
ADV override Mode.
18 EP310 Installation Manual
+Hr
+Hr
+Hr
SELECT SET
+Hr
+Hr
+Hr
SELECT SET
+Hr
+Hr
+Hr
SELECT SET
1 MODE
2 MODE
MODE
SELECT SET
Short press Mode while in ADV
to exit mode for CH1 back to
auto or Once.
1 MODE
2 MODE
MODE
SELECT SET
Short press Mode while in ADV
to exit mode for CH2 back to
auto or Once.
1
MODE
2 MODE
MODE
SELECT SET
Short press Mode while in
ADV to exit mode back
to auto or Once.
+Hr
+Hr
+Hr
+Hr
+Hr
+Hr
+Hr
+Hr
+Hr