Salus EP310 Installation Manual page 13

Programming the EP310
2 types of programs can be set:
• 5+2 (Mon to Fri same and Sat, Sun same)
• Different programs for each 24h.
There are 3 different time sets for each day.
5-2 Days Program
3 sets of time/channel
3 sets of time/channel
Total: 12 settings/week
EP310 is a 3 channel controller, that gives the possibility to control both Central Heating in 2 different zones
and Hot Water. You can choose which one you would like to control, by simply pressing the 1
Central Heating in zone 1, the 2
you can use them together, as by your needs. You can program the schedules for these outputs individually or
for the all 3. When you program them altogether, there will be the same program time for both CH1, CH2 and
the HW. If you choose to program them individually, you can have different program times for each.
5+2 Program
Programming CH1, CH2 and HW individually
1
1 MODE
2 MODE
MODE
SELECT SET
Press Set to enter
setting programs.
4
1 MODE
6
2 MODE
MODE
SELECT SET
Press Select.
Weekdays
Weekends
Mode key for Central Heating in zone 2 or
2
+Hr
1 MODE
+Hr
2 MODE
+Hr
MODE
The CH1 icon and Mon-Fr will start
flashing. Press Select.
5
+Hr
1 MODE
+Hr 2 MODE
+Hr MODE
Use up/down arrows
Individual Days Program
3 sets of time/channel
Total: 63 settings/week
+Hr
6
+Hr
+Hr
SELECT SET
+Hr
6
+Hr
+Hr
SELECT SET
to select minutes.
1 Day
Mode key for
Mode key for hot Water, or
3
1 MODE
6
2 MODE
MODE
SELECT
The CH icon will go steady, the
program number will appear
and you will need to select a
start time for the CH program.
Use up/down arrows.
6
1 MODE
6
2 MODE
MODE
SELECT
Press Select.
EP310 Installation Manual
+Hr
+Hr
+Hr
SET
+Hr
+Hr
+Hr
SET
13