Table of Contents
Advertisement
OFF Mode
1
MODE
2
MODE
MODE
SELECT
SET
3 sec
Press for CH1.
Pressing the Mode key 4 times activates the OFF Mode. In OFF mode, the controller gives the boiler the OFF
command, so the heating or the hot water will be turned off.
ADV Mode
Note: In ONCE or AUTO mode, by long pressing the MODE button, the controller will switch automatically
to ADV. You can cancel the ADV by long pressing the MODE key. The device will then return to ONCE or
AUTO mode. You can't select ADV by pressing Mode key.
1
MODE
2
MODE
MODE
SELECT
SET
3 sec
Press for CH1.
When in Auto mode selecting ADV, the controller will simply toggle the current auto setting (ON or OFF).
For example, if the current program is set as:
08:00 ON
09:00 OFF
Selecting ADV between 8:00 and 8:59 will change the output to OFF, from 9:00 onwards back to AUTO (which
is also OFF). Selecting ADV between 9:00 and 09:59 will change the output to ON, from 10:00 onwards back to
AUTO (which is also ON). If the ADV puts the relay ON then the boost would apply immediately at the next OFF
change, if the ADV put the relay OFF then the boost would apply immediately and turn the relay ON.
08:00 OFF
10:00 ON
If ADV occurs at 08:30 and the relay is ON from 08:30 to 12:00. During this period, if at 08:45 +1Hr (Boost) is
pressed, the relay will be ON from 08:30 to 12:00. Boost is applied immediately from 08:45 to 09:45. If ADV
occurred at 10:30 the relay will be ON from 10:00, OFF from 10:30 (ADV) to 14:00 if no +1Hr Override. During
ADV, if at 10:45 +1Hr (Boost) is pressed relay ON again at 10:45 (boost starts), OFF at 11:45 (Boost ends) until
ends at 14:00, then ON again at 14:00.
10 EP310 Installation Manual
+Hr
1
MODE
+Hr
2
MODE
+Hr
MODE
Press for CH2.
+Hr
1
MODE
+Hr
2
MODE
+Hr
MODE
Press for CH2.
10:00 ON
11:00 OFF
12:00 OFF
14:00 ON
+Hr
+Hr
+Hr
SELECT
SET
3 sec
+Hr
+Hr
+Hr
SELECT
SET
3 sec
1
MODE
2
MODE
MODE
SELECT
SET
3 sec
Press for HW.
1
MODE
2
MODE
MODE
SELECT
SET
3 sec
Press for HW.
+Hr
+Hr
+Hr
+Hr
+Hr
+Hr
Advertisement
Table of Contents
