Salus EP110 Installation Manual page 11

ON Mode
MODE
SELECT
OFF Mode
MODE
SELECT
ADV Mode
Note: In ONCE or AUTO mode, by long pressing the MODE button, the controller will switch automatically
to ADV. You can cancel the ADV by long pressing the MODE key. The device will then return to ONCE or
AUTO mode. You can't select ADV by pressing Mode key.
MODE
SELECT
Long press Mode while
in Auto or Once
08:00 OFF 10:00 ON
If ADV occurs at 08:30 and the relay is ON from 08:30 to 12:00. During this period, if at 08:45 +1Hr (Boost) is
pressed, the relay will be ON from 08:30 to 12:00. Boost is applied immediately ie. from 08:45 to 09:45 at the next
change, ie. 12:00. If ADV occurred at 10:30 the relay will be ON from 10:00, OFF from 10:30 (ADV) to 14:00 if no
+1Hr Override. During ADV, if at 10:45 +1Hr (Boost) is pressed, the relay will go ON again at 10:45 (boost starts),
OFF at 11:45 (Boost ends) until ends at 14:00, then ON again at 14:00.
Pressing the Mode key 3 times activates the AUTO. In AUTO mode, the
controller gives the boiler the ON/OFF command depending on your
+Hr
schedule.
SET
Pressing the Mode key 4 times activates the OFF Mode. In OFF mode, the
+Hr
controller gives the boiler the OFF command, so the heating or the hot
water will be turned off.
SET
When in Auto mode selecting ADV, the controller will simply toggle the
current auto setting (ON or OFF). For example, if the current program is
set as:
+Hr
08:00 ON
SET
Selecting ADV between 8:00 and 8:59 will change the output to OFF, from
9:00 onwards back to AUTO (which is also OFF). Selecting ADV between
9:00 and 09:59 will change the output to ON, from 10:00 onwards back
to AUTO (which is also ON). If the ADV puts the relay ON then the boost
would apply immediately at the next OFF change, if the ADV puts the
relay OFF then the boost would apply immediately and turn the relay ON.
12:00 OFF 14:00 ON
09:00 OFF 10:00 ON 11:00 OFF
EP110 Installation Manual 11