Examine The Results; Save The Results; About Projects - Fluke CableAnalyzer DSX-5000 Getting Started Manual

4. Examine the Results

The tester shows multiple views of the test results (Figure 5):

WIRE MAP: Shows the connections between the ends of
the cable under test. The tester compares the connections
to the selected Outlet Configuration to get a PASS or FAIL
result.

PERFORMANCE: Shows the overall result for each test that
is required by the selected test limit. To see detailed results
for a test, tap the panel.

DIAGNOSTIC: Shows the HDTDR
results, which help you troubleshoot failures.
Figure 5. Examples of Twisted Pair Results Screens

5. Save the Results

5-1 Tap SAVE if the test passed or FIX LATER if the test
failed.
5-2 If the Cable ID box shows the correct ID, tap SAVE.
To enter a cable ID, tap the Cable ID box on the SAVE RESULT
screen, use the keyboard to enter a name for the results, tap
DONE, then tap SAVE.
The tester saves the results in the DEFAULT project, unless you
selected a different project.

About Projects

You can set up a project to specify the settings and tests
necessary for a job, monitor the status of a job, and organize the
test results.
To start a new project, tap PROJECT on the home screen, tap
CHANGE PROJECT, then tap NEW PROJECT. See the Users Manual
or Technical Reference Handbook on the DVD for more
information.
and HDTDX
™
analyzer
™
HFO02.EPS