Fluke CableAnalyzer DSX-5000 Getting Started Manual page 5

2-3 On the TEST SETUP screen, tap the panels to change
settings:

Cable Type: Select a cable type that is correct for the
type you will test.

Test Limit: Select the correct test limit for the job. To see a
different group of limits, tap MORE, then tap the name of
a group.
2-4 Outlet Configuration: Select the correct configuration for
the cable you will test.
2-5 To save the settings, tap SAVE on the TEST SETUP screen.
A
B
C
D

To set up a project, tap the PROJECT panel.

To change settings for the test or select a different test, tap
the test setup panel.

To set up cable IDs and turn on Auto Save, tap the Next ID
panel.

To enter the operator name, tap the Operator panel.
Figure 2. Panels on the Home Screen
-continued-
HFO01.EPS