TP-Link AC50 Configuration Manual page 84

Set Time
Time Zone
NTP Server I / NTP
Server II
 Manually
Figure 9-11 Get Automatically From the Internet
If the AC cannot access the Internet, you should set the system time manually.
Current Time
Set Time
Date
Time
Synchronize with PC's
Clock
Note:
AC500 has a built-in RTC (Real-time Clock) chip, the system time won't be restored to the default time setting
when the AC is rebooted or powered off. AC50 doesn't have an RTC chip. Please set the time manually or
connect to the internet to set the time after the device is rebooted or powered off.
Specify the way the time is set (get automatically from the internet or manually).
Specify the time zone of the device.
IP Address for the NTP Server.
Displays the current system time.
Specify the way the time is set (get automatically from the internet or manually).
Specify the time zone of the device.
IP Address for the NTP Server.
Click this button, and the system time of the device will be matched with the
current time on the host PC.
80