TP-Link AC50 Configuration Manual page 62

Figure 7-23 Add a Formal User
User Type
User Name
Password
Authentication
Timeout
Authentication Period
MAC Address Binding
Type
Maximum Users
Name
Telephone
Description
Status
Specify the user type as formal user.
Specify the username. The username should not be the same as any existing
one.
Specify the password. Users will be required to enter the user name and
password when they attempt to access the network.
Specify the authentication timeout for formal users. After the timeout, the users
need to log in at the web authentication page again to access the network.
Specify the authentication period during which the users can log in to the web
authentication page.
There are three types of MAC binding: No binding, Static binding and dynamic
binding.
If dynamic binding is selected, the MAC address of the first user that passes
the authentication will be bound.
If static binding is selected, the MAC address of all users that pass the
authentication will be bound.
Specify the maximum number of users able to use this username and password
to authencitate.
Specify the user's name (optional).
Specify the user's telephone number (optional).
Enter a description for the user (optional).
Specify whether to turn on authentication.
58