TP-Link AC50 Configuration Manual page 65

Retry Count
Timeout Interval
NAS IP Address
Authentication Type
 Authentication Server
Choose the menu Authentication > Authentication Server > Authentication Server to load
the following page.
Figure 7-27 Server Group
Here you can view or edit the server group.
Click to add a new entry.
Figure 7-28 Add a Serve Group
Group Name
Authentication Type
Main Server
Standby Server
Recovery Time
Description
If no reply is received after the client sends a connect request, it will keep
resending the request. Specify the number of times the client is allowed to
resend the request.
Specify the timeout interval after the client sends a request packet.
Specify the NAS IP address for the authentication. Generally, it is the address
by which the AC and Radius server communicate. This field can be left empty.
The authentication type includes PAP, CHAP, MSCHAP and MSCHAPv2.
Specify a group name for the authentication server. The group name should not
be the same as the existing one.
Select the authentication server type. Only Radius server is supported so far.
Select the main server for the group. The main server will have higher priority.
Select the standby server for the group. If the main server malfunctions, the
standby server will come into use.
Specify the time interval after the main server malfunctions for reconnection.
Specify a description for the authentication server group.
61