Non-Sense Authenticated User - TP-Link AC50 Configuration Manual

2.4.2 Non-sense Authenticated User

Non-sense authenticated users are users who have passed the authentication, leave the
wireless network and then join the wireless network again. If the time they left is within the
time threshold set by the AC, they don't have to re-authenticate.
Choose the menu Status > Authentication Status > Non-sense Authenticated User to load
the following page.
Figure 2-5 Non-sense Authenticated User
You can check the information of the non-sense authenticated users on this page. Select
the desired users by checking the box in the front of the entries. Click the buttons above
the list for additional operations.
Delete
Search
Global Search
Refresh
Auto Refresh
Delete the users from the authentication list.
Search the specified users in the list.
Search the specified users globally.
Refresh the list manually.
Check the box to enable the Auto Refresh function. With it enabled, the list will
refresh every few seconds automatically.
Disconnect the client from the AP in this corresponding entry.
10