Rate Settings - TP-Link AC50 Configuration Manual

5.2 Rate Settings

Choose the menu Radio > Rate Settings > Rate Settings to load the following page. Specify
the data transmission rate on this page.
Figure 5-3 Rate Settings
802.11a Basic Rate: Specify the basic rate set with which the 802.11a clients are
allowed to access the network. At least one rate should be selected from the
rate set. 6Mbps, 12Mbps and 24Mbps are selected by default.
Supported Rate: Specify the supported rate for 802.11a clients. The supported
rate set should not overlap with the basic rate set. 9Mbps 18Mbps, 36Mbps
48Mbps and 54Mbps are selected by default.
Multicast Rate: Specify the multicast rate for the 802.11a multicast packets.
The rate should be selected from the basic rate set. When auto is selected, the
system will select a suitable rate from the basic rate set automatically.
33