6
Wireless
6.1 Wireless Service
Choose the menu Radio > Wireless > Wireless Service to load the following page.
Figure 6-1 Wireless Service
Specify and view the wireless service on this page. Click
service. Click
Figure 6-2 Add a New Wireless Service
Status
SSID
Description
AP Isolation
button, you can go into the radio binding page.
Specify whether to enable the wireless network.
Specify the SSID (Service Set Identifier) for the wireless network. The SSID
should be unique.
Specify a description for the entry to make it easier to search for and manage.
Enable AP isolation to isolate the wireless clients connected to the same AP
so that they cannot communicate with each other. This setting cannot take
effect in other APs; that is, AP isolation cannot isolate the clients connected to
different APs with the same SSIDs.
37
to create a new wireless