Ap Database - TP-Link AC50 Configuration Manual

Upgrade Status
Operation
Note:
1. Only one model can upgrade at a time.
2. When the AC reboots or the CAPs reboot automatically, the CAPs can only upgrade after ten minutes.
3. The parameter of upgrade process and upgrade failure will be cleared when the AC reboots.
4. The standby link doesn't support upgrade schedule.

4.3 AP Database

Import the AP database file to support the identification and management of new AP
models on this page. When there is an undetected AP model connecting to the AC, the AC
should import the latest AP database to identify the new AP models.
Choose the menu AP Control > AP Database > AP Database to load the following page.
Figure 4-6 AP Settings
Current Version
File Path
Download the latest AP
database
Displays the upgrade status of current APs of this model. Click to check the
detailed upgrade information of each AP of this model.
Latest: There is no AP of the current model to be upgraded.
Waiting: APs of the current model are waiting to be upgraded.
Upgrading: Some APs of the current model are upgrading.
Completed: All APs of the current model are upgraded.
Terminated: The upgrade was disabled while the AP was waiting to upgrade.
The AP's upgrade process is terminated. When the upgrade is enabled again,
the status of the AP will change to "Waiting".
Click Import to import the upgrade firmware into the system.
Click Delete to delete the firmware.
Displays the current version of the AP database.
Click Browse to locate and select the new AP database. Click Upgrade to
import it.
Click Download the latest AP database. You will be redirected to the TP-Link
download center to download the AP database files. The download center will
update the AP database file.
27