Chapter 11
11. 8. Remote Management
Remote Management allows remote devices to access and manage the router. By
default, all remote devices cannot access and manage the router.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
System Tools
Management
section as needed.
3. Enable
Remote Management
enable
Remote Management
want to allow Remote Management via HTTP.
4. Keep the Port as the default setting.
5. Decide which remote device can access the router remotely:
•
Only the Following IP/MAC Address
the remote device to access the router.
•
All
- All remote devices can access the router.
6. Click Save.
Note: If a warning pops up when you visit the above address remotely, click Trust (or a similar option) to continue.
11. 9. System Log
When the router does not work normally, you can save the system log and send it to the
technical support for troubleshooting.
¾ To save the system log locally:
1. Visit http://tplinkwifi.net, and log in the password you set for the router.
2. Go to
System Tools
>
Administration
if you want to allow Remote Management via HTTPS, or
and then disable
>
System
Log.
and complete the settings in
Remote Management via HTTPS
- Enter the IP Address or MAC Address of
Manage the Router
Remote
if you
62