TP-Link TL-MR3020 User Manual page 51

Chapter 10
¾ To specify the IP address that the router assigns:
1. Enable DHCP Server.
2. Enter the starting and ending IP addresses in the
3. Enter other parameters if the ISP offers. The
and is the same as the LAN IP address of the router.
4. Click Save.
¾ To reserve an IP address for a specified client device:
1. Click Add in the Address Reservation
2. Click Scan to find a connected device you want to apply this rule to. You can also
maunally enter the MAC address of the device if it's currently disconnected from the
router.
3. Enter the IP address
4. Tick the Enable This Entry
section.
to reserve for the client device.
checkbox and click Save.
Customize Your Network Settings
IP Address Pool.
Default Gateway is automatically filled in
48