DISASSEMBLY
11
Clip
To Flowchart
DC fan
(with heat sink)
1
3
TOP
FOR SAFETY
A
B
A
B
2
B
B
DISASSEMBLY
When assembling,
make sure that the
clips securely hook
on the sockets.
To remove the heat sink, raise the CPU straight up from
the Retention module. However, there can be a case that
the CPU has adhered to the heat sink. In such a case, raise
the CPU straight up from the Retention module being careful
that the CPU pins must not be bent.
Then warm up the CPU and heat sink using a hair dryer or
the like, and then separate the CPU from the heat sink by
inserting a spatula in between them. While executing this
work, do not apply excessive heat to CPU. Also be careful
not to apply excessive force to CPU with spatula.
Heat sink
Retention module
– 15 –
FRAMEHARNESS
EXPLODED VIEW
qa
DC FAN (WITH HEAT SINK)
Removal procedure
Clips
1 Remove the connector.
2 Press the clips in the
direction of the arrow A
Sockets
to release the lock and
remove the clips.
3 Raise the DC fan
(with heat sink) in the
direction of the arrow B
and remove it.
CPU
PARTS LIST