Dc Fan (With Heat Sink) - Sony Vaio PCV-W500GN1 Service Manual

DISASSEMBLY
11
DC fan
(with heat sink)
1
TOP TOP FOR SAFETY FOR SAFETY
Clip
A B
A B
2
B B
3
DISASSEMBLY FLAMEHARNESS
FLAMEHARNESS
When assembling,
make sure that the
clips securely hook
on the sockets.
To remove the heat sink, raise the CPU straight up from
the Retention module. However, there can be a case that
the CPU has adhered to the heat sink. In such a case, raise
the CPU straight up from the Retention module being careful
that the CPU pins must not be bent.
Then warm up the CPU and heat sink using a hair dryer or
the like, and then separate the CPU from the heat sink by
inserting a spatula in between them. While executing this
work, do not apply excessive heat to CPU. Also be careful
not to apply excessive force to CPU with spatula.
Heat sink
Retention module
– 15 –
EXPLODED VIEW
EXPLODED VIEW
!¡

DC FAN (WITH HEAT SINK)

1 Remove the connector.
Clips
2 Press the clips in the
direction of the arrow A
to release the lock and
Sockets
remove the clips.
3 Raise the DC fan
(with heat sink) in the
direction of the arrow B
and remove it.
CPU
PARTS LIST PARTS LIST