2-9.
CPU AND HEAT SINK (L400 ONLY)
5 Remove four claws.
1 harness
• HEAT SINK INSTALLATION
3 Push the clips in the order of
arrows B and C using a screwdriver.
B
PCV-L400/L600
it is also fixed with a thermal
tape stuck to the heatsink.
4 harness
1 Remove a strippig paper.
C
2-6
6 heatsink
2 Remove two hooks.
2 Tilt toward the arrow A ,
meeting the clows
of clips at two places.
E
D
3 CPU
A
4 Push the clips in the order
of arrows D and E
using a screwdriver.