Sony vaio PCV-W500GN1 Service Manual page 13

DISASSEMBLY
9
To Flowchart
1
ENX-20/26 board,
DC fan, and others
A A
4
TOP FOR SAFETY
ENX-20/26 board
Bracket (KI)
2
Copper leaf tape
(W500GN1/W510G)
3
5
Attach the two copper
leaf tapes (25) as
shown in the right picture.
Copper leaf tapes
(W500GN1/W510G)
1
DISASSEMBLY
FRAMEHARNESS
9
ENX-20/26 BOARD, RISER BOARD
6
Coaching clip
q;
8
7
6
B
A
Copper leaf tape
Copper leaf tapes
– 13 –
EXPLODED VIEW
Removal procedure
1 Remove the two connectors.
Riser
9
2 Peel off the copper leaf tape.
board
(W500GN1/W510G)
3 Remove the
three screws.
4 Remove the ENX-20/26 board,
DC fan, and others in the
6 direction of the arrow A.
Then disconnect the B-to-B
connector.
5 Peel off the copper leaf tape.
6 Remove the four
screws and the
coating clip.
7 Remove the ENX-20/26 board
and the Riser board in the
direction of the arrow B.
8 Remove the two
screws and
Bracket (KI).
9 Disconnect the B-to-B connector,
and remove the Riser board from
the ENX-20/26 board.
q; Disconnect the connector.
PARTS LIST
+B (3 X 6)
7-682-547-09
Black
+PSW (3 X 6)
7-682-947-01
Gold
+PSW (3 X 6)
7-682-947-01
Gold