Sony vaio PCV-W500GN1 Service Manual page 16

DISASSEMBLY
12
To Flowchart
A
1
TOP FOR SAFETY
To replace the CPU or heat sink (in case that CPU
is equipped with heat sink), install new CPU or
heat sink after thermal dissipation grease is wiped
off and apply the grease to the position shown
2
in the figure.
Thermal dissipation grease: Silicon compound
CPU
Amount of application: 0.5 g (equivalent to twice
∗ Take care not to apply the grease to any other
places because it has high conductivity.
DISASSEMBLY
FRAMEHARNESS
(G-765) 90G
the size a wooden safety
match head)
Grease
(on the entire surface
of heat splitter)
– 16 –
PARTS LIST
EXPLODED VIEW
qs
Removal procedure
1 Raise the lever in the
direction of the arrow A.
2 Pull the CPU straight up
and remove it.
CPU