Sony vaio PCV-W500GN1 Service Manual page 23

DISASSEMBLY
19
Give folding to flexible flat board
LEX-48 board
To Flowchart
Detents
Precautions during installation.
When performing the air-blowing
on the acrylic panel, perform it
starting from center toward
outside.
TOP FOR SAFETY
Flexible flat cable
(LED)
Aluminum tape
(W600G/W700G)
2
Flexible flat cable (LED)
3
4
LEX-48 board
DISASSEMBLY
FRAMEHARNESS
LCD unit, LCD chassis assy,
and others.
Ground plate
Aluminum tape
(Upper)
(W700G)
3
Ground plate
1 2
(Lower)
3
Ground plate
(Lower)
– 23 –
EXPLODED VIEW
ql
LEX-48 BOARD
Removal procedure
1 Remove the
three screws.
2 Peel off the aluminum tape.
(W600G/W700G)
3 Disengage the fourteen
detents, and remove the
two Ground plates (Lower),
one Ground plate (Upper),
LCD unit, LCD chassis
assy, and others.
3
4 Disengage the three
detents, remove the
LEX-48 board, and remove
the Flexible flat cable (LED).
Detents
PARTS LIST
+PS (3 X 6)
7-682-647-01
Gold