Idis DC-T4533HRX Quick Manual
Hide thumbs Also See for DC-T4533HRX:

Advertisement

Quick Links

Network
Camera
Quick Guide
DC-T4533HRX
Powered by

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DC-T4533HRX and is the answer not in the manual?

Questions and answers

Summary of Contents for Idis DC-T4533HRX

  • Page 1 Network Camera Quick Guide DC-T4533HRX Powered by...
  • Page 2: Safety Precautions

    Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1. Read Instructions 10. Overloading All the safety and operating instructions should be read before the Do not overload wall outlets and extension cords as this can result appliance is operated.
  • Page 3: Fcc Compliance Statement

    IDIS Co., Ltd. reserves all rights concerning this document. Use or duplication of this document in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited. Contents of this document are subject to change without prior notice for reasons such as functionality enhancements.
  • Page 4 Bushings (4 ea.) back cover Allen Wrench Please download software (IDIS Discovery, IDIS Center, IDIS Solution Suite Compact) and product manual from this link : https://www.idisglobal.com/support/csdownload - IDIS Website (www.idisglobal.com) > Support > Technical Resources - Search IDIS Discovery, IDIS Center, IDIS Solution Suite Compact.
  • Page 5: Camera Installation

    Camera Installation Inserting a SD Memory Card Loosen the screws counterclockwise and remove the cover. Make sure that the cover is joined properly when screwing it; otherwise, the IP67 level is not guaranteed. Waterproof Cable Installation Insert a SD memory card into the SD memory card RJ45 waterproof rubber ring slot with the ‘micro SD’...
  • Page 6 Insert the network cable into the waterproof cap, Lock the waterproof cap into the waterproof cap rubber bushing, and waterproof cap body in order. body. Not pulling the cable back may cause water to seep in and damage the product. Installation • Check the wall or ceiling to see if it needs to be reinforced.
  • Page 7 Screw Connect external devices, network and power adapter. Apply power. Network Camera...
  • Page 8: Specifications

    Specifications Vandal Resistance Out-door Ready IP67, Heater Operating Temperature -40°C ~ +55°C (-40°F ~ +131°F) Boot Up Temperature -20°C ~ +55˚C (-4°F ~ +131˚F) Operating Humidity 0% ~ 90% Power Source , PoE Power Consumption , 0.78A, 9.36W PoE (IEEE 802.3af Class 3), 8W Approval FCC, CE, IK10 External Dimensions (Ø...
  • Page 12 IDIS Co., Ltd. For more information, please visit www.idisglobal.com...

Table of Contents