Idis DC-T1232WR Quick Manual
Hide thumbs
Also See for DC-T1232WR:
- Operation manual (46 pages) ,
- Operation manual (49 pages) ,
- Installation manual (22 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Idis DC-T1232WR
Summary of Contents for Idis DC-T1232WR
- Page 1 Network Camera Quick Guide DC-T1232WR / DC-T1234WR / DC-T1233WHR Powered by...
- Page 2 Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1. Read Instructions 10. Overloading All the safety and operating instructions should be read before the Do not overload wall outlets and extension cords as this can result appliance is operated.
- Page 3 IDIS Co., Ltd. reserves all rights concerning this document. Use or duplication of this document in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited. Contents of this document are subject to change without prior notice for reasons such as functionality enhancements.
- Page 4 Accessories Upon purchasing the product, check inside the box to make sure all the following accessories are included. Some parts may differ depending on the situation. Network Camera Mounting Bracket Camera Sun Shield Open Source Guide Quick Guide Allen Wrench Sun Shield Screw, O Ring (1ea.) Screws (4ea.) Ferrite Core...
- Page 5 Cable DC-T1232WR model DC-T1233WHR model Audio Out (Red Cable) Audio In (White Cable) DC-T1234WR model BNC Video Out (Yellow Cable) FGND Power In (Red Cable) Network Port Alarm In Alarm Out Network Camera...
- Page 6 Camera Installation Screw the camera sun shield to the camera using the screw and rubber provided with the camera. Screw the mounting bracket to the wall or ceiling by using screws provided with the camera. Screw the bottom cover to the mounting bracket by using screws provided with the camera. Adjust the camera angle by bending the stand.
- Page 7 11.43” x 3.6" x 3.6" (290.2mm x 90.5mm x 90.5mm) Weight (Main Unit) 2.6 lbs. (1.17kg) Boot Up Temperature* DC-T1234WR, 32°F to 122°F (0°C to 50°C) DC-T1232WR DC-T1233WHR 32°F to 122°F (0°C to 50°C) [-4°F to 122°F (-20°C to 50°C) when the heater is operating] Working Temperature* DC-T1234WR, 14°F to 122°F (-10°C to 50°C)
- Page 8 IDIS Co., Ltd. For more information, please visit www.idisglobal.com...
Need help?
Do you have a question about the DC-T1232WR and is the answer not in the manual?
Questions and answers