Operation; Switching On The Measuring Instrument - wtw Cond 3300i Operating Manual

Cond 3300i/3400i
Measuring instrument
4

Operation

4.1

Switching on the measuring instrument

1 Connect a conductivity measuring cell to the measuring instru-
ment.
2 Press the <ON/OFF> key.
The display test appears briefly on the display.
Subsequently, the selected cell constant and the temperature
compensation that was set up appear for approx. one second
one after the other.
The measuring instrument then automatically switches to the
measuring mode that was last selected.
Note
The measuring instrument has an energy saving feature to avoid un-
necessary battery depletion. The energy saving feature switches the
measuring instrument off if no key has been pressed for an hour. The
energy saving feature is not active when the AutoStore function is ac-
tive.
The energy saving feature is also not active
3400i
if the power is supplied by the plug-in power supply,
if the communication cable and a PC with a running communication
program are connected,
if the recorder cable is connected,
if the printer cable is connected (for external printers).
Operation
13