Troubleshooting; Factory Reset - JK Audio AutoHybrid IP2 User Manual

Error Indicators
Please note that some issues may be resolved by refreshing or
updating your browser.
! Conference LED flashes rapidly:
No ethernet link detected.
X
Conference LED flashes 1 sec on, 1 sec off:
!
No IP address detected.
X
! LAN Jack LEDs are orange/red, or unlit:
The LAN jack is not receiving a signal from the network or the ethernet cable
X
is not connected properly.
Basic Reset
Insert a paperclip to restart AutoHybrid IP2 instead of power cycling
Confirmation of the reset is indicated by lighting all the LEDs.
Network Reset
To reset the AutoHybrid IP2 to its default DHCP settings:
Hold the <Line 1 Call> & <Line 2 Drop> for 10 seconds.
Confirmation of the reset is indicated by lighting all the LEDs.

Factory Reset

To clear your AutoHybrid of all saved information and restore it to its factory settings:
Hold the <Line 1 Call> & <Conference> for 10 seconds.
Confirmation of this reset is also indicated by lighting all the LEDs.

Troubleshooting

Troubleshooting
15