Accounts; Network - JK Audio AutoHybrid IP2 User Manual

Accounts

General
Registering
AutoHybrid IP2 replaces your VoIP phone, therefore you must register it with your
VoIP service. On the Accounts tab, enter your account information. After you
enter ALL of your account information, click <Save> and <Restart SIP Service>
for changes to take effect. Your Account information is saved on the AutoHybrid
IP2, it will not need to be re-entered unless it is unregistered.
Account Name (ex: Studio1)
This is only used to identify your IP2 in your configuration and system logs. It is
not necessarily required for registering your IP2 with your SIP service/VoIP phone
system. Create a friendly name that is easy to read and remember. An example
would be a host's name to identify the device as opposed to its IP address.
Display Name (ex: John)
When making peer-to-peer calls, this is how you will be identified to the party
you are calling. When using a SIP service and making a call by dialing a phone
number, the number assigned to your account by your SIP service/VoIP phone
system may be used to identify you to the party you are calling. Caller ID must be
supported/provided by your SIP service/VoIP phone system in order for the party
you are calling to see your identifying information. The Display Name may be the
same as your Username but should be more accountable if you have a popular
username.
Username / Number (ex: J12345)
This information will be provided by your SIP service/VoIP phone system. Enter
the username that is associated with your SIP account. If this field is left blank, or
if you enter the information incorrectly, you may have difficulty registering/using
the IP2 with your SIP service/VoIP phone system.
Domain (ex: sip.ringcentral.com)
Enter the domain of your registered SIP account. If registering IP2 with a SIP
service, enter the SIP Domain provided by your SIP service. If you are installing
the IP2 on your network, and you will not be accessing outside lines, leave this
field blank. Leaving the Domain field blank will only allow calls to devices within
the user's network.
Domain Registration
Check this box if you are registered with a domain to be able to receive calls. If
unchecked, the account will be started in Peer-to-Peer mode and you will not be
able to call outside of your local area network.
Password
Enter the password provided by your SIP service/VoIP phone system
IT administrator.
8
AutoHybrid IP2™ VoIP/AoIP Codec