JK Audio AutoHybrid IP2 User Manual page 17

Management
Configure
Product Registration / Firmware Updates
Your AutoHybrid IP2 contains many advanced features, but we are constantly
looking for ways to improve. Product Registration allows us to keep you informed
of any firmware updates that become available in the future.
Please register by visiting: http://www.jkaudio.com/support/
New Firmware
To update the firmware, you must request a .bin update file from
support@jkaudio.com. Please provide the IP2 serial number with your request.
In the AutoHybrid GUI, click <Browse> on the Update tab, then find the .bin file
you just downloaded then click <Update Firmware>. AutoHybrid will restart and
prompt you to log in again after it is done installing.
Configure/Upload
Configure the IP2 with a saved configuration by clicking
<Select configuration file>. Once you have selected a valid configuration file,
upload it by clicking <Upload Configuration>.
Backup/Download
Save all changes you made including account information and Codec selection
by clicking <Download Configuration>.
Reboot/Restore
Reboot
To Reboot the IP2, press <Reboot>.
Restore
To restore the factory configuration of the IP2, press
<Restore Factory Settings>.
13
Graphic User interface