Cardinal MED VUE Mv1 Owner's Manual page 53

Medical weight analyzer
Table of Contents

Advertisement

Journal Mode Print Command
The host device (computer) sends:
<LF> J <CR>
This command is equivalent to pressing the PRINT/ENTER key on the MedVue weight
analyzer keypad. The MedVue weight analyzer will respond by printing a ticket using the serial
port (or transmit data using the USB Device port). The ticket will be printed (or data
transmitted) in the following format:
ID: xxxxxxxxxxxxxx, DATE: date, TIME: time, WEIGHT: displayed weight,
units, HEIGHT: ht, BMI: bmi <CR><LF>
NOTE: This command is equivalent to pressing the PRINT/ENTER key on the MedVue
weight analyzer keypad with the PRINTER TYPE set for Print Journal Line (PRINTER
TYPE =1) parameter selected.
IMPORTANT! If the ENAbLE Id (ID number) or bOdY MASS IdX (BMI Calculation) features
are disabled, the field will be left out on any three formats.
Data Queue Commands
The MedVue weight analyzer has been equipped with storage for weight records. When
taking a weight record, once the PRINT/ENTER key is pressed, the weight, ID (if enabled and
entered), date and time are stored in the indicator. The indicator can store up to 200 weight
records. Once the limit is reached, the oldest record will be over written to make room for the
new weight record.
Delete Data Queue Command
The host device (computer) sends:
<LF> XD <CR>
The MedVue weight analyzer will Delete the Data Queue.
Recall Data Queue Command
The host device (computer) sends:
<LF> XS <CR>
The MedVue weight analyzer will Recall the Data Queue. The ticket will be printed (or data
transmitted) in the following format:
ID, Date, Time, Weight, Units, Mode<cr><lf>
Where:
ID =
xxxxxxxxxxx
Date =
mm/dd/yy
Time =
hh:mm
Weight =
xxxxxx.x
Units =
uu
m =
Mode
cr =
Carriage Return
lf =
Line Feed
NOTE: Recalling the data queue does not delete the current data. The separate delete
command must be sent to clear the queue.
8555-M512-O1 Rev D 01/15
Up to 11 digit ID number
Month, Day, Year
Hours and Minutes
Six digits with decimal point
None, lb, kg, oz, g, st
G = Gross
(hex 0D)
(hex 0A)
47

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MED VUE Mv1 and is the answer not in the manual?

Table of Contents

Save PDF