Cardinal MED VUE Mv1 Owner's Manual page 36

GRAVITY
With GRAVITY displayed, press the PRINT/ENTER key. The display will change to
GRAVITY ENAbLE. Proceed to the Enable Gravity Constant parameter.
Otherwise, press the ID/HEIGHT key to advance to the LOCK menu.
GRAVITY ENAbLE (Enable Gravity Constant)
The Detecto MedVue
function which means that it can be calibrated in one location and then adjusted to match
the gravity at the location where it will used.
The display will show GRAVITY ENAbLE and the current setting. If the value displayed is
acceptable, press the PRINT/ENTER key to save it. Otherwise use the numeric keys 0/NO
or 1/YES and enter a new setting. Press the PRINT/ENTER key to save it.
Allowable values are YES or no.
YES = Enable Gravity Constant and
proceed to CAL GRAVITY parameter
CAL GRAVITY (Calibrated Gravity Constant –
This is the gravity constant of the location where the scale was calibrated. NOTE: Consult
the factory Tech Support for the Gravity Constant for your location.
The display will show CAL GRAVITY and the current setting. If the value displayed is
acceptable, press the PRINT/ENTER key to save it. Otherwise, using the numeric keys,
enter a new value and then press the PRINT/ENTER key to save it.
Allowable values are 0 through 99,999.
OP GRAVITY (Operating Gravity Constant –
This is the gravity constant for the location where the scale will be operated. NOTE:
Consult the factory Tech Support for the Gravity Constant for your location.
The display will show OP GRAVITY and the current setting. If the value displayed is
acceptable, press the PRINT/ENTER key to save it. Otherwise, using the numeric keys,
enter a new value and then press the PRINT/ENTER key to save it.
Allowable values are 0 through 99,999.
30
®
Model MV1 Weight Analyzer is equipped with a gravity constant
no = Disable Gravity Constant and
proceed to the HOLd MOdE parameter
Only if GRAVITY ENAbLE = YES
Only if GRAVITY ENAbLE = YES
8555-M512-O1 Rev D 01/15
)
)