Supermicro X11SAE-M User Manual page 51

SMBus to PCI Slots
Jumpers JI C1 and JI
2 2
PCI-E/PCI slots. The default setting is Open (Disabled.) Both jumpers must be set to the same
setting (JI C1 controls the clock and JI
2
ME Manufacturing Mode Select
Close JPME2 to bypass SPI flash security and force the system to use the ME Manufacturing
Mode, which will allow you to flash the system firmware from a host server to modify system
settings. Refer to the table below for jumper settings.
AUDIO FP
1
JPL2
2
SIO
JBT1
PCH
C236
DIMMA1
DIMMA2
DIMMB1
B3
JL1
DIMMB2
BIOS
JSD1
BAR CODE
FAN3
C2 allow you to connect the System Management Bus (I
C2 controls the data). The default setting is Disabled.
2
SMBus to PCI Slots
Jumper Settings
JI C1 Setting JI C2 Setting
2 2
JI C1: Pins 1-2 JI C2: Pins 1-2
2 2
JI C1: Pins 2-3 JI C2: Pins 2-3
2 2
ME Manufacturing Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacturing Mode
HDMI/DP
HD AUDIO
LAN2 LAN1
USB0/1 USB6/7(3.0)
MH12
JPL1
MH11
X11SAE-M
BIOS
REV: 1.01
LICENSE
DESIGNED IN USA
MH10
CPU Socket LGA 1151
MH9
J23
M.2 PCI-E 3.0 X4
ALWAYS POPULATE BLUE SOCKET FIRST
UNB ECC/NON-ECC DDR4 DIMM REQUIRED
USB8/9(3.0)
JPW1
USB10/11(3.0)
51
Definition
Enabled
Disabled
1. SMBus to PCI Slots
2. Manufacturing Mode
DVI-D
USB12/13(3.1)
FAN5
JPW2
JVR1
FAN4
FAN1
LED3
S1
BIOS RESTORE
SP1
JD1
LED1
FAN2
JLED1
JF1
Chapter 2: Installation
C) to the
2