Supermicro X11SAE-M User Manual page 54

X11SAE-M User's Manual
Onboard Power LED
LED1 is an Onboard Power LED. When this LED is lit, it means power is present on the
motherboard. In suspend mode, this LED will blink on and off. Be sure to turn off the system
and unplug the power cord(s) before removing or installing components.
Standby Power LED
The 5V standby power LED is located at LED3. When this LED is on, the standby power is
connected. Unplug the power cable before removing or installing components. Refer to the
table below for the LED status.
AUDIO FP
JPL2
SIO
JBT1
PCH
C236
B3
JL1
BIOS
JSD1
BAR CODE
FAN3
Onboard Power LED Indicator
LED Color Definition
System Off
Off (power cable not
connected)
Green System On
Standby Power LED Indicator
LED Settings
LED Color Definition
5V Standby Power
Off Off (power cable
not connected)
Standby Power
Green
cable connected
HDMI/DP
HD AUDIO
LAN2 LAN1
USB0/1 USB6/7(3.0)
MH12
JPL1
MH11
X11SAE-M
BIOS
REV: 1.01
LICENSE
DESIGNED IN USA
MH10
CPU Socket LGA 1151
MH9
J23
M.2 PCI-E 3.0 X4
ALWAYS POPULATE BLUE SOCKET FIRST
UNB ECC/NON-ECC DDR4 DIMM REQUIRED
DIMMA1
DIMMA2
DIMMB1
DIMMB2
USB8/9(3.0)
JPW1
USB10/11(3.0)
54
1. Onboard Power LED
2. Standby Power LED
DVI-D
USB12/13(3.1)
FAN5
JPW2
JVR1
FAN4
FAN1
2
LED3
S1
BIOS RESTORE
SP1
1
JD1
LED1
FAN2
JLED1
JF1