Dimension (Mm) - Digital Watchdog C235T Series Instruction Manual

DIMENSION (mm)

CONNECTION
*BNC / TERMINAL
Connect the coaxial cable(with pre-wired BNC plug) to the BNC
connector (Video) of the camera.
If you are using an automatic iris lens with the camera, the lens
has to be connected to the A-Iris socket of the camera. If you
are using a lens with manual or fixed iris, this socket is not
used.
The operating voltage is either connected to the designated
terminal block (12V/DC,24V/AC). Operation of the camera will
be confirmed by the power LED at the rear side of the camera
*A-Iris socket
Video Driven (VIDEO)
1.+8,5 VDC
2.NC
3.Video signal
4.GND
DC Driven (DC)
1.control –
2.control +
3.drive +
4.GND