Subaru IMPREZA 2001 Service Manual page 17

C: ADJUSTMENT
1) Using special tool, loosen body-side bolts of up-
per and lower hinges to align the position of rear
door panel longitudinally and vertically.
2) Loosen door-side bolts of upper and lower hing-
es to align the position of rear door panel vertically
and laterally at front-end.
3) Loosen screw (A) and tap striker (B) using plas-
tic hammer to adjust striker.
CAUTION:
Do not use an impact wrench. The welding area
on the striker nut plate is easily broken.
REAR DOOR PANEL
B5M0933A
G5M0385
B5M0934A
EB-15
EXTERIOR BODY PANELS