Front Door Panel - Subaru IMPREZA 2001 Service Manual

4. Front Door Panel

A: REMOVAL
1) Disconnect ground cable from battery.
2) Remove front door trim. <Ref. to EI-20, REMOV-
AL, Front Door Trim.>
3) Remove outer mirror assembly. <Ref. to GW-46,
REMOVAL, Outer Mirror Assembly.>
4) Remove front door regulator and motor. <Ref. to
GW-31, REMOVAL, Front Regulator and Motor As-
sembly.>
5) Remove front door latch assembly. <Ref. to SL-
30, REMOVAL, Front Door Latch Assembly.>
6) Remove front outer handle. <Ref. to SL-29, RE-
MOVAL, Front Outer Handle.>
7) Remove front pillar lower trim to disconnect con-
nector from body harness.
8) Put wooden block on jack and place jack under
door. Support door with a support jack to protect it
from damage.
9) Remove checker bolts.
FRONT DOOR PANEL
10) Remove door-side bolts for upper and lower
hinges to remove door.
11) Using special tool, remove body-side bolts for
upper and lower hinges, and remove door hinges.
ST 925610000
CAUTION:
B5M0726
• During removal and installation of doors, do
not damage body.
• Doors are heavy. Be careful not to drop and
damage them.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Apply grease to sliding area of door hinges.
BO0261
S5M0183
EB-11
EXTERIOR BODY PANELS
G5M0385
DOOR HINGE WRENCH
B5M0933A