Rf Controller (Optional); Wireless Control (Optional) - Envirovent HeatSava Installation Manual

10

RF Controller (Optional)

AFTER INSTALLING THIS UNIT PLEASE PASS ONTO END USER
DO NOT THROW AWAY
To pair an additional RF controller
1. Turn the unit off at the isolation point.
2. Restore power; for 20 seconds from restart the unit
will be in pairing mode.
3. Press the remote button once within the 20 seconds
and the control will pair to the unit.
4. Successful pairing is indicated by a green light on the
control.
Press button once to show current function. Press
button again within 3 seconds to move to next function
(trickle & boost only).
Other functions are automatic, each function has an
indicator light, which operates once selected.
23